AccuRender nXt

advanced rendering for AutoCAD

Starting a new thread...

Latest version of AccuRender Studio is here.  Among other changes:

  1. ArStudio command automatically loads the model and begins interactive rendering in addition to bringing up the Control Panel palette.
  2. Decal interface has been redone to include multiple decals and cylindrical projections.
  3. Legacy data is being handled a little better.

Views: 392

Reply to This

Replies to This Discussion

Yes, the glass material translated as Refractive automatically.

I'm having trouble getting the desired view in Studio.

I've tried setting the view in nXt walkabout and then using that to set the AutoCAD view.

However, when I render from Studio, it gives me something different (see images below).

Interesting.  ArStudio has its own WalkAbout-like feture, it's the little camera button.  If you do it while the preview is running you should see the view changes automatically in the rendering.

That sorted it - using the Studio camera and then selecting "Get AutoCAD view".

Two things don't seem to translate from nXt:

Procedural bump and orientation of texture in a material.

 

Also, if a decal is changed using nXt, Studio continues to display the original decal.

Editing the decal in the Studio material pallet didn't work either. I had to delete the old one and then use ARDECAL to add the new one.

Thanks, I'll check on the first two.  The third is normal behavior-- data conversion stops when the arstudio data is detected.  There is a command to remove the arstudio data which would allow you to start from scratch-- probably not what you want.

RSS

Search

Translate

Latest Activity

N` Goraw posted a photo
Oct 11
Roy Hirshkowitz replied to Douglas Thompson's discussion Accurender 3 + Acad ADT3 + Windows 10
"I really have no idea.  This software hasn't been supported for more than a decade.  Anything you can get to work will be fine from a licensing perspective, I just don't have much to offer you."
Oct 5
Douglas Thompson posted a discussion

Accurender 3 + Acad ADT3 + Windows 10

Wonder if anyone can help. At home I run Windows 7, at work I have Windows 10.At home I use Accurender 3 with Acad ADT3, installed by loading my old Accurender 3 disk, the  downloading the latest *arx file, which I see on my home computer is Accuren3_2000.Can I still download the Accuren3_2000 update from anywhere, and will it work with the office set up anyway? I have tried simply copying the Accuren3_2000.arx from home to work into the Accurender folder in the usual location, but when trying…See More
Sep 29
Roy Hirshkowitz replied to norton torres's discussion I GOT AN ERROR WHILE RENDERING IN AUTOCAD 2010
"I'm guessing it's the same problem.  nXt has to be present for a conversion to work properly with a drawing that has nXt data.  That's a known issue.  Converting using any other method probably will not work properly if…"
Aug 23
George Ioannidis replied to norton torres's discussion I GOT AN ERROR WHILE RENDERING IN AUTOCAD 2010
"I think Norton mentioned that he did the conversion using TrueView, not the AutoCAD itself. He is still on ver. 2010 I suppose, otherwise he could do renderings directly in 2018. Maybe TrueView isn't quite versionwise correct as regards to…"
Aug 21
Roy Hirshkowitz replied to norton torres's discussion I GOT AN ERROR WHILE RENDERING IN AUTOCAD 2010
"One additional thought.  A known issue when saving drawings to a previous version is that nXt must be loaded and running before you convert the drawing. Try the following: 1. Open your 2018 drawing in AutoCAD. 2. Start nXt by typing…"
Aug 1
Roy Hirshkowitz replied to norton torres's discussion I GOT AN ERROR WHILE RENDERING IN AUTOCAD 2010
"Interesting.  I'm not sure what I can do about it-- the oldest AutoCAD I have available for testing is 2013.  AutoCAD 2010 is actually 12 years old which is an eternity in software.  You can try sending me a simple converted…"
Aug 1
norton torres replied to norton torres's discussion I GOT AN ERROR WHILE RENDERING IN AUTOCAD 2010
"yes... is every 3d model that I I import from autocad 2018 to autocad 2010 and  it dosent matter that I convert the drawing  in trueview to dwg 2010 it continues the error, it happens this way, I open the drawing in autocad 2010 then I…"
Jul 31

© 2021   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service