AccuRender nXt

advanced rendering for AutoCAD

Here's the latest version of the new stuff.  If you're interested, try it at your leisure and let me know what you find.  It's a work in progress, so please be kind.  We'll likely have some bugs and certainly have some missing features.

******

Some highlights:

Standalone renderer which accepts input from Rhino, Sketchup, Obj and FBX.

Plugins for AutoCAD and other CAD applications.

Online material and plant libs.

Single advanced engine with fewer compromises and biases.  Similar to current hybrid engine but noisier.

*******

AccuRender Studio is 64 bit only and will not run on 32 bit machines.
On older machines, the installation may require updating .net versions which can be a lengthy process. Windows 10 is recommended (but not required.)

The AutoCAD plugin can be run with or without a recent version of nXtRender loaded.
If you run the plugin without nXtRender, you will get only AutoCAD information in the ArScene file. If nXtRender is loaded some conversion of nXt information will occur.

Instructions:

1. Download and install AccuRender Studio.
2. Open an AutoCAD session.
3. Load the correct .net AccuRender Studio plugin for your version of AutoCAD by typing           netload at the command prompt (not appload!) and navigating to

    c:\program files\AccuRender Studio.  The plugin versions are:

    ArStudioAcadPluginR19.dll (AutoCAD 2013-2014)

    ArStudioAcadPluginR20.dll (AutoCAD 2015-2016)
    ArStudioAcadPluginR21.dll (AutoCAD 2017)
    ArStudioAcadPluginR22.dll (AutoCAD 2018)


    You should only have to do this step once. The file will be demand loaded after that.

4. Optionally load nXtRender (by typing nxt at the command line, for example).
5. Type arstudio at the command line to run the command. It will inform you if the correct         version of nXtRender was found. If not, an update from RenderPlus may be required.

Views: 856

Reply to This

Replies to This Discussion

Yes the standalone runs - I don't have many scenes to open in it, but the file Material.ArScene seems to open OK.

I ran a vanilla version of 2018 Mechanical, just to see if it was different, and Arstudio runs OK. So... presumably there is something loading or a setting causing the problem in my day-to-day Acad set-up!

I loaded my custom routines into the vanilla version, but that didn't make it fall over - any thoughts?

I'm really interested in this-- if you're willing to help.  I'll need to send you a version that writes a log file to see where it fails, and whether I can do anything about it.

RSS

Search

Translate

Latest Activity

Josman Peguero posted a photo
yesterday
Sampdoria replied to Sampdoria's discussion License Problem
"Great! thank you Rich!"
Jun 8
Rich Hart replied to Sampdoria's discussion License Problem
"On this page: http://renderplus.com/wp2/download/ Look for:"
Jun 8
Sampdoria posted a discussion

License Problem

Dear All- I purchased a license for Nxt back in 2011- I migrated to AutoCAD 2013 2 years later- I have recently changed my system with the same AutoCad 2013- When I try to renew my AccuRender Ver 1.0.358, it does not accept the original 30 numeralCode.- I know that we need to renew the software if we are using a new AccuRender.- Therefore, since I cannot renew until it is approved by the management, where can I find theolder AR5 64 Bit version to reinstall.Thanks!!!BirdmanSee More
Jun 8
Sampdoria commented on Ljiljana Jankovic's photo
Thumbnail

kuhinja

"Very pretty interior render! Well done!"
Jun 8
Ljiljana Jankovic posted photos
Jun 6
Zdravko Todorovic replied to Zdravko Todorovic's discussion License no longer valid with latest build, please help.
"Command: nxtbUnknown command "NXTB". Press F1 for help. NXTB, not working with OA30, please allow me to use this addons."
Jun 5
Kevin Lockwood replied to Ted Kyte's discussion Latest version of AccuRender nXt?
"thanks, done"
Jun 4

© 2018   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service