AccuRender nXt

advanced rendering for AutoCAD

If I start a new drawing in AutoCAD 2018, load nXt and then press the Walkabout button, AutoCAD crashes instantly.

However, this doesn't happen if I start with a template, or open an old drawing originally created in AutoCAD 2011.

Views: 15

Reply to This

Replies to This Discussion

I've narrowed the problem down.

It has nothing to do with AutoCAD 2011. The problem is the initial plan view when starting a blank new drawing.

If I rotate the AutoCAD view before pressing the Walkabout button, then everything works fine.

After that there is no problem reverting back to plan view.

I can duplicate this.

I can also duplicate it in AutoCAD 2015, 2016 and 2017.

I'll see if I there is a way to we can detect and fix this.

Thanks.

RSS

Search

Translate

Latest Activity

Roy Hirshkowitz replied to Roy Hirshkowitz's discussion AccuRender Studio for AutoCAD
"Posted build 0085 which addresses this."
21 hours ago
Roy Hirshkowitz replied to Roy Hirshkowitz's discussion AccuRender Studio for AutoCAD
"I'll give that a try later this morning.  I may ask for more details or a model next week."
yesterday
Peter Milner replied to Roy Hirshkowitz's discussion AccuRender Studio for AutoCAD
"I got the decals working, but if I then edit one of the materials, the decals disappear when the model reloads. If I then close ArStudio and re-launch it, they're back again."
yesterday
Peter Milner replied to Roy Hirshkowitz's discussion AccuRender Studio for AutoCAD
"7302 SPP - 40 minutes on 80 cores."
yesterday
Roy Hirshkowitz replied to Roy Hirshkowitz's discussion AccuRender Studio for AutoCAD
"I'm still mulling that one over.  I took it out because it's very confusing to people about when to use mapping or when to use a local transform in the material-- and how the two interact.  I can put a rotation back in pretty…"
yesterday
Peter Milner replied to Roy Hirshkowitz's discussion AccuRender Studio for AutoCAD
"Yep, decals are now working. I'm happy to go with IOR 1.5 if it doesn't slow the rendering down. Any joy with rotating texture images?"
yesterday
Roy Hirshkowitz replied to Roy Hirshkowitz's discussion AccuRender Studio for AutoCAD
"I forgot to mention window glass properties that will negatively impact performance-- Not using the Thin checkbox and modeling glass Using a bump map of any kind Using surface roughness It's fine to do all of the above when you need to. …"
Friday
Roy Hirshkowitz replied to Roy Hirshkowitz's discussion AccuRender Studio for AutoCAD
"Nice.  I can certainly add passes as a constraint.  I did this to keep it consistent with the cloud stuff, where I won't be adding passes since everyone is billed by time. Passes, BTW, are called Samples per Pixel in the Image…"
Friday

© 2018   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service