AccuRender nXt

advanced rendering for AutoCAD

Hi,

I've just reactivated my old 32-bit machine
after a clean reinstall of everything.

Just to run test-renders as i did before -
It was possible to run renders with hdris, even with slightly
complex materials with displacement attached.

Now I'm not able to run a render longer than a minute, even with
totally simple model/no materials/default settings and low resolution .

Autocad crashes, Computer restarts.

Running AC 2012 with arnxt_0348-NK21.

Can everybody give me a hint - every help would be greatly appreciated.

Views: 335

Attachments:

Reply to This

Replies to This Discussion

What would I be without Greece:)

Will try the procedure you have suggested.

Power supply can't be- did not changed anything here.

Thanks George!

Don't be so sure about power supply. My son's game rig started shutdowns suddenly. We changed even the mo-bo without any success. Shutdowns continued. Until I did p.s. swap (from my machine to his). Guess what happened? :) Grüße von Griechenland Thorsten :)

Turn CPU max down-- usually something like 95% will take care of it.

Doesn't that mean that turning your CPU 95% down it will run only at 5% of its full horsepower? Does it mean that the rendering will then run 20X longer than of full CPU throttle? Or did you mean to set the CPU usage to 95%? Are those 5% enough to keep things cool enough? Interesting issue anyway.

Abracadabra; adjusting 'Maximum Processor State' (in 'Processor Power Management') -
so it does not exceed 95% of its capabilities seems to be doing the trick - as Roy pointed out. Thanks!

Will try new thermal compound anyway - maybe i can switch back fan spin after this .

Super! Another useful lesson learned. Thanks Roy!

You can experiment with this setting if you want- sometimes 99% works  fine and slightly improves performance.  Or you can leave it alone-- these heat shutdowns are not really very good for a computer.

RSS

Search

Translate

Latest Activity

David Richards replied to Alfons Akamp's discussion Flecken in Bilder
"This page on our site provides some insight into the performance of the different engines http://www.renderplus.com/wp2/wk/NXtRender_Rendering_Engines.htm#Hybrid_Engine_4"
2 hours ago
Alfons Akamp posted a discussion

Flecken in Bilder

Ich habe da mal eine Frage:Wenn ich Bilder im Standard Modus rendere, sehen diese sehr gut aus.Wenn ich das gleiche Bild im Hybrid Modus rendere, habe ich jede Menge kleine weisse Punkte und Flecken in dem Bild.Warum und wieso kommen diese Flecken????I've got a question:When I render images in standard mode, they look very good.When I render the same image in hybrid mode, I have tons of tiny white spots and spots in the image.Why and why do these spots appear ????See More
Sep 5
Dizzy Gosnell posted photos
Aug 12
George Ioannidis posted discussions
Aug 10
George Ioannidis commented on Peter Milner's photo
Thumbnail

sven-home ambus exec lifestyle 01

"Very professionally looking render! Looks very photo-realistic."
Aug 10
James Bloomer posted photos
Aug 3
Peter Milner posted photos
Jul 30
James Bloomer posted photos
Jul 24

© 2020   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service