AccuRender nXt

advanced rendering for AutoCAD

Any idea why the decals applied to the wide sign holders at the back and back-left of this image show, while those applied to the narrower sign holders do not?  The sign holders are similar blocks, the only difference is one is wider than the other.  I just tried this on a whim. Always before I've applied decals to a solid within the block, but in this case that would require about a dozen blocks or a separate solid with graphic placed in front of each sign holder.

Views: 140

Attachments:

Reply to This

Replies to This Discussion

There's a known issue with "instanced" blocks and decals applied directly to the block insertion.  Blocks become instanced after you get to a certain number-- 5 I think.  Your best bet is to apply a decal to an object within the block.  You may be able to do this using the in-place block editor in AutoCAD.  If not, you can certainly wblock it out, apply the decal, and insert it back in.

Very nice rendering, BTW.  Don't be shy about submitting to the gallery.

RSS

Search

Translate

Latest Activity

Paul Cloutier posted a discussion

nXtRender vs AutoCAD RT

My first try with nXt.Same models, same textures, same lights (ies 100W x 4).2 minutes render time.See More
Dec 25, 2019
Paul Cloutier replied to Paul Cloutier's discussion Material help !
"Hello Kevin Thanks. I will look at Yoooootube for more infos."
Dec 25, 2019
Kevin Lockwood replied to Paul Cloutier's discussion Material help !
"I used your mask (alpha) file as a mask in photoshop and saved out to png."
Dec 24, 2019
Paul Cloutier replied to Paul Cloutier's discussion Material help !
"Hello Kevin It's work with your .PNG file. Did you just SAVEAS a .JPG to a .PNG with a image editor ? Capture.PNG Render.png"
Dec 24, 2019
mike makki replied to Daniel Hargreaves's discussion Accustudio
"I can help daniel"
Dec 24, 2019
Kevin Lockwood replied to Paul Cloutier's discussion Material help !
"I'm not sure if you are applying the tree to the region as a decal or as part of a material. if a decal onto the region, I don't think AR will allow 2 decals. I guess you could stack them but I don't think one applies to the other…"
Dec 23, 2019
Paul Cloutier posted a discussion

Material help !

Hello...Need help for settings alpha for this tree bitmap.AutoCAD 2018.Thanks !See More
Dec 23, 2019
Daniel Hargreaves posted a discussion

Accustudio

I know this is hard to believe, but Accustudio is over 20 years old. It has been quiet for a couple of years now at the site. I'm looking to hand it off to the next generation. Is there anyone interested in working on the site and eventually taking over the ownership of it?See More
Dec 3, 2019

© 2020   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service