AccuRender nXt

advanced rendering for AutoCAD

Has anyone successed in importing sketch up models with the NXT widget?

Views: 235

Reply to This

Replies to This Discussion

I have not.

Why not to do it using AutoCAD importer?

This success recorded via the autocad importer route is no better than that of NXT?

My old horse AR5 ver. 1.0.318 did this:

With 3ds files it's the bomb.

I usually open the SketchUp file and export it to a 3DS file....then add the 3DS file into ACAD via nXt.

Although....some issues as of late...see http://accurender.ning.com/forum/topics/tex-mesh-crashes?xg_source=...

John

It looks like it still works somewhat with SketchUp 8 and older models.

I'll see if I can fix it to support models through SketchUp 2018, and take a look at the material mapping problems that I'm seeing.

Thanks...

I posted a new version where Importing SketchUp models is working for all SketchUp files through version 2018, for 64 bit machines.

Note: the 32 bit version can only import SketchUp models saved from SketchUp 2016 and earlier versions, since SketchUp's 2017 and 2018 SDKs now only support 64 bit.

This was tested for AutoCAD versions 2015 through 2018, both 32 and 64 bit.

You can download this latest version from the downloads page:

http://renderplus.com/wp2/download/?product=nXtRender%20for%20AutoCAD

Thanks Rich! Up and running...

RSS

Search

Translate

Latest Activity

Paul Cloutier posted a discussion

nXtRender vs AutoCAD RT

My first try with nXt.Same models, same textures, same lights (ies 100W x 4).2 minutes render time.See More
Dec 25, 2019
Paul Cloutier replied to Paul Cloutier's discussion Material help !
"Hello Kevin Thanks. I will look at Yoooootube for more infos."
Dec 25, 2019
Kevin Lockwood replied to Paul Cloutier's discussion Material help !
"I used your mask (alpha) file as a mask in photoshop and saved out to png."
Dec 24, 2019
Paul Cloutier replied to Paul Cloutier's discussion Material help !
"Hello Kevin It's work with your .PNG file. Did you just SAVEAS a .JPG to a .PNG with a image editor ? Capture.PNG Render.png"
Dec 24, 2019
mike makki replied to Daniel Hargreaves's discussion Accustudio
"I can help daniel"
Dec 24, 2019
Kevin Lockwood replied to Paul Cloutier's discussion Material help !
"I'm not sure if you are applying the tree to the region as a decal or as part of a material. if a decal onto the region, I don't think AR will allow 2 decals. I guess you could stack them but I don't think one applies to the other…"
Dec 23, 2019
Paul Cloutier posted a discussion

Material help !

Hello...Need help for settings alpha for this tree bitmap.AutoCAD 2018.Thanks !See More
Dec 23, 2019
Daniel Hargreaves posted a discussion

Accustudio

I know this is hard to believe, but Accustudio is over 20 years old. It has been quiet for a couple of years now at the site. I'm looking to hand it off to the next generation. Is there anyone interested in working on the site and eventually taking over the ownership of it?See More
Dec 3, 2019

© 2020   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service