AccuRender nXt

advanced rendering for AutoCAD

Dear All

- I purchased a license for Nxt back in 2011

- I migrated to AutoCAD 2013 2 years later

- I have recently changed my system with the same AutoCad 2013

- When I try to renew my AccuRender Ver 1.0.358, it does not accept the original 30 numeral

Code.

- I know that we need to renew the software if we are using a new AccuRender.

- Therefore, since I cannot renew until it is approved by the management, where can I find the

older AR5 64 Bit version to reinstall.

Thanks!!!

Birdman

Views: 214

Reply to This

Replies to This Discussion

On this page:

http://renderplus.com/wp2/download/

Look for:

Great! thank you Rich!

hi rich

does the old build version works with 2017 autocad?

thanks

No, the old build only work with AutoCAD versions through 2013.

RSS

Search

Translate

Latest Activity

Roy Hirshkowitz replied to Marko Stout's discussion renderfarm
"Yes."
Wednesday
Marc Chaumier posted photos
Wednesday
Marc Chaumier replied to Marko Stout's discussion renderfarm
"...but the 64 bits release is still working?"
Wednesday
norton torres replied to norton torres's discussion accurender version 1.0.354
"ok... the RPS_nXtRender_R22_x64 sudenly is there... magic..!! thanks HART.... I JUST DOMLOAD AGAIN AND REBOOT..."
Monday
norton torres replied to norton torres's discussion accurender version 1.0.354
"NO 22 ..."
Monday
Rich Hart replied to norton torres's discussion accurender version 1.0.354
"Normally, nXtRender registers its commands with AutoCAD during installation. On occasion, this mechanism may fail. In this case you will need to manually load nXt the first time you run it in a particular version of AutoCAD.   Use the…"
Monday
norton torres replied to norton torres's discussion accurender version 1.0.354
Monday
norton torres posted a discussion

accurender version 1.0.354

why I cant use accurender version 1.0.354 in autocad 2018See More
Monday

© 2019   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service