AccuRender nXt

advanced rendering for AutoCAD

Hi Guys

i hope someone can point me in the right direction here, i am doing an internal image as a night scene. so i have a few lights in the model but for some reason when i set it to render half of the lights dont show up as being turn on, so it ruins the whole scene. Any ideas?

thanks guys.

Rick

Views: 179

Reply to This

Replies to This Discussion

depending on the number of lights you have in the scene, NXT renders (be default) eight lights every pass. So if you have more than eight lights you do not expect them all to render immediately in the first pass.

thanks mate, so after a few passes they should show up right? the image looks a bit funny, i have had to turn the sun on a get some natural light in there and combine it with some lighting fixtures. do you have any other tips for internal lighting? thanks for replying mate.

Model the wall, put in your lights, then render and make adjustments as necessary. When all is done and ok. Bring in the furnitures. Meanwhile check Peter Milner Sample Office.

cool, thanks man.

Yes all other lights will come up later and also, with lights use real world units when specifying, the luminance  of lighting fixtures.

what do you mean about real world unit?

The same wattage that would be produce had you bought the bulb from the store.

ohh, yeh ive done that on all the lights. thanks again man

Send the drawing if you can't figure it out.  Use the upload link under Support.

RSS

Search

Translate

Latest Activity

Tom Jarvi posted photos
Mar 12
OYEBANJI EMMANUEL posted a photo

Render 1 copy (1)

This is a remake of one of Peter Milner's scenes. I dont have the file. I photo-matched it in sketchup and rendered in nxt render for autocad.I just retouched it and increased the resolution.
Dec 20, 2023
OYEBANJI EMMANUEL posted a photo

Render 1

This is a remake of one of Peter Milner's renders.I dont have the file. I photo-matched the scene in sketchup and rendered with nxt render in autocad.I replicated it.
Dec 18, 2023
OYEBANJI EMMANUEL posted a photo

00001 copy

An office render i did recently.Critics and comments are welcome.Its one of the frames of a walkthrough animation i did recently.I used sketchup to model, exported to autocad and rendered with nxt render.
Nov 22, 2023
OYEBANJI EMMANUEL posted a discussion

nxt render Course/tutorial

Good day Sir,I want to know the number of people that would be interested in a nxt render course because i plan to create one.Please send me a prompt reply if you are interested.Just sayHi am in.Checkout a walkthrough i just created recently with nxt render for autocad after modelling in sketchup and then post-producing in photoshop.…See More
Nov 5, 2023
OYEBANJI EMMANUEL replied to N` Goraw's discussion ACCURENDER NXT FOR WALKTHROUGHS
"Good day Sir, Hope this message meets you well. I just completed a short walkthrough of an office. Its down here https://drive.google.com/file/d/1L4p5Iyiq5MiSK137UT1eH3POuiI5ZLDA/view?usp=drive_link"
Nov 5, 2023
Maciej posted photos
Jun 6, 2023
Marko Stout replied to Peter Milner's discussion Comotion
"Is comotion still om progres? I need to make some moving parts in NXT!!"
Apr 7, 2023

© 2024   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service