AccuRender nXt

advanced rendering for AutoCAD

Is there a maximum number of cores that Accurender can utilise?

Views: 29

Reply to This

Replies to This Discussion

Sort of-- nXt has a hard-coded max of 32 but you get diminishing returns before than point.  If you go beyond 32 they can sometimes be used, depending on the load.  I guess I would still think of 32 as a practical limit.

ArStudio should do much better--  far more threads are created than the number of physical cores present,  the scheduler and the load balancing is much improved, and the hard-coded limit is gone.  I've only got 16 physical cores here, so it's a bit hard to test.  It's almost a moot point since I implemented noise-reduction, most renderings converge so fast now that I'm not yearning for extra cores.

Okay. Just tried to install and run ArStudio, but I get this message inside AutoCAD:

There should be an Update Manager in the Start menu.  Grab and install 0267.  If this doesn't work I'll send a link.

RSS

Search

Translate

Latest Activity

N` Goraw posted a photo
Oct 11
Roy Hirshkowitz replied to Douglas Thompson's discussion Accurender 3 + Acad ADT3 + Windows 10
"I really have no idea.  This software hasn't been supported for more than a decade.  Anything you can get to work will be fine from a licensing perspective, I just don't have much to offer you."
Oct 5
Douglas Thompson posted a discussion

Accurender 3 + Acad ADT3 + Windows 10

Wonder if anyone can help. At home I run Windows 7, at work I have Windows 10.At home I use Accurender 3 with Acad ADT3, installed by loading my old Accurender 3 disk, the  downloading the latest *arx file, which I see on my home computer is Accuren3_2000.Can I still download the Accuren3_2000 update from anywhere, and will it work with the office set up anyway? I have tried simply copying the Accuren3_2000.arx from home to work into the Accurender folder in the usual location, but when trying…See More
Sep 29
Roy Hirshkowitz replied to norton torres's discussion I GOT AN ERROR WHILE RENDERING IN AUTOCAD 2010
"I'm guessing it's the same problem.  nXt has to be present for a conversion to work properly with a drawing that has nXt data.  That's a known issue.  Converting using any other method probably will not work properly if…"
Aug 23
George Ioannidis replied to norton torres's discussion I GOT AN ERROR WHILE RENDERING IN AUTOCAD 2010
"I think Norton mentioned that he did the conversion using TrueView, not the AutoCAD itself. He is still on ver. 2010 I suppose, otherwise he could do renderings directly in 2018. Maybe TrueView isn't quite versionwise correct as regards to…"
Aug 21
Roy Hirshkowitz replied to norton torres's discussion I GOT AN ERROR WHILE RENDERING IN AUTOCAD 2010
"One additional thought.  A known issue when saving drawings to a previous version is that nXt must be loaded and running before you convert the drawing. Try the following: 1. Open your 2018 drawing in AutoCAD. 2. Start nXt by typing…"
Aug 1
Roy Hirshkowitz replied to norton torres's discussion I GOT AN ERROR WHILE RENDERING IN AUTOCAD 2010
"Interesting.  I'm not sure what I can do about it-- the oldest AutoCAD I have available for testing is 2013.  AutoCAD 2010 is actually 12 years old which is an eternity in software.  You can try sending me a simple converted…"
Aug 1
norton torres replied to norton torres's discussion I GOT AN ERROR WHILE RENDERING IN AUTOCAD 2010
"yes... is every 3d model that I I import from autocad 2018 to autocad 2010 and  it dosent matter that I convert the drawing  in trueview to dwg 2010 it continues the error, it happens this way, I open the drawing in autocad 2010 then I…"
Jul 31

© 2021   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service