AccuRender nXt

advanced rendering for AutoCAD

We at Render Plus will be working with Roy to create a new version of nXt for AutoCAD which will now be called nXtRender for AutoCAD.

For the past few years we have been interfacing the nXt Engine into Revit and SketchUp and we thought it would make sense for us to work on the AutoCAD platform as well. Sorry for the confusion the new name will create, but we wanted to come up with a name we could use for all three platforms - AutoCAD, Revit and SketchUp.

We are planning to "merge" the user interfaces to the nXt Engine on the three platforms - to take advantage of any special features which are in the the different platforms already, and, hopefully to add some feature you will like.

If you click Downloads above, you will be downloading the latest version, Spin 320. The only change is this version is that it allows a 30-day free trial at full resolution and it uses a new licensing scheme for new purchasers.

Rich, Jake and I, (from Render Plus), will be helping Roy respond to things here on the forum, and will be working mostly on the User Interface to nXtRender so that Roy can concentrate more on the nXtRender Engine itself.

Let us know what we can do to make it better.

Views: 1804

Reply to This

Replies to This Discussion

Hi Albert, if we hace  already a  nxt license, It will worl with the new  nxtrender for Autocad? 

If you purchased a nXt license for AutoCAD, it will work with the latest versions.

Starting with new versions in March it will only work with new versions if you purchased it within 12 months of the new versions. We will be offering renewals for people whose licenses are more then 12 months old.

You can continue to use your existing license with any versions put out within 12 months of purchase, but for newer versions you will have to renew it.

Hi Al,

Have you scheduled the described timeline as pricing and upgrading policy, that is to say cost of new seat of nXtRender for AutoCAD, of upgrade from older (more than year) NXT for AutoCAD licence or eventually the possibility of changing the platform from AutoCAD to Sketchup?

nXtRender for AutoCAD now costs $499.00.

All Renewals will be $120.00 prior to April 1, afterApril 1, they will be $240.00 - for the latest release and all releases for the next 12 months. We don't penalize people who wait a long time to renew. Some people may want to renew early just to get the lower cost for the next 12 months.

We are also offering an All-Platform license. (SketchUp, Revit and AutoCAD) This will be $320.00 for upgrade and renewal a the same time.

A platform change, which also includes the renewal, is $240.00. So it may make more sense to get the all platform license - whichever works best for you.

All licenses include a Laptop license - you can use the same license on both your Desktop and your laptop.

We also have discounts for 3 seat license and network/site licenses.

Great! Just one more question: say you have done a model in SU and got it ready to render in NXT for SU. If one imports the model using the new SU import capability of NXT will it automatically translate all materials properly? In other words, will be AutoCAD NXT materials compatible with SU NXT ones and vice versa (loadable by both applications without any further editing)?

That all-platform licence sounds really exciting!

Ich habe seit gut einem Jahr eine Lizenz von euch.

Jetzt habe ich Build 320 installiert und wieder einen 30 Tage Testmodus. Warum ist die Lizenz die ich habe, nicht automatisch in Build 320 übernommen worden? Muss ich jetzt eine neue Lizenz kaufen??

Wenn das ab March 2013 teurer wird, wann kommen denn echte Wolken (clouds) und andere Sachen die noch fehlen??

Wann werden die vielen Pixelpunkte weniger und AR5 schneller???

Alfons

Ich habe seit gut einem Jahr eine Lizenz von euch.

Jetzt habe ich Build 320 installiert und wieder einen 30 Tage Testmodus. Warum ist die Lizenz die ich habe, nicht automatisch in Build 320 übernommen worden? Muss ich jetzt eine neue Lizenz kaufen??

Wenn das ab March 2013 teurer wird, wann kommen denn echte Wolken (clouds) und andere Sachen die noch fehlen??

Wann werden die vielen Pixelpunkte weniger und AR5 schneller???

---

I have for over a year a license from you.

Now I have installed build 320 and again a 30-day trial mode. Why is the license that I have been not automatically added to Build 320? Do I have to buy a new license?

If the more expensive from March 2013, when then real clouds (clouds) and other things come that are still missing?

When the number of pixels to be less and AR5 points faster?

---

Version 320 should have recognized your old license. We will try to figure out what went wrong.

In the meantime, you can run under the 30 day trial (it is a full version with no resolution restrictions), or you can download an older version from: Old Downloads

I own an nXt license. If I don't choose to upgrade, how long will my current licence work? Will it expire at some point?

Your current license will work with the current version indefinitely. ( unless either Microsoft or AutoDesk puts out a version of sorthing which is not compatible.)

Of course, we hope that you will like one of the new features we hope to add to nXtRender so much tat you will decide to upgrade someday...

I can't find an option to Renew my license on the website.  How can I do this?

It's not there yet. I'll add one and add a pst to this thread.

RSS

Search

Translate

Latest Activity

David Richards replied to Alfons Akamp's discussion Flecken in Bilder
"As you point out, it's not practical to render 250-300 frames for an animation in Hybrid Mode.  Packet Mode is  the most efficient way do this with our software."
Tuesday
Alfons Akamp replied to Alfons Akamp's discussion Flecken in Bilder
"Hallo David Das mag alles richtig sein, was Sie sagen. Für Einzelbilder ist es auch kein Problem da mal eben über Nacht 800 oder 1000 oder 1500 Passes zu machen. Aber was ist, wenn man eine Animation mit 250 - 300 Bilder rendert? Wenn…"
Monday
David Richards replied to Alfons Akamp's discussion Flecken in Bilder
"This page on our site provides some insight into the performance of the different engines http://www.renderplus.com/wp2/wk/NXtRender_Rendering_Engines.htm#Hybrid_Engine_4"
Sep 18
Alfons Akamp posted a discussion

Flecken in Bilder

Ich habe da mal eine Frage:Wenn ich Bilder im Standard Modus rendere, sehen diese sehr gut aus.Wenn ich das gleiche Bild im Hybrid Modus rendere, habe ich jede Menge kleine weisse Punkte und Flecken in dem Bild.Warum und wieso kommen diese Flecken????I've got a question:When I render images in standard mode, they look very good.When I render the same image in hybrid mode, I have tons of tiny white spots and spots in the image.Why and why do these spots appear ????See More
Sep 5
Dizzy Gosnell posted photos
Aug 12
George Ioannidis posted discussions
Aug 10
George Ioannidis commented on Peter Milner's photo
Thumbnail

sven-home ambus exec lifestyle 01

"Very professionally looking render! Looks very photo-realistic."
Aug 10
James Bloomer posted photos
Aug 3

© 2020   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service