AccuRender nXt

advanced rendering for AutoCAD

Has anyone got any ideas why a particular obj file might disappear when I try to turn it into an AutoCAD mesh?

Views: 85

Reply to This

Replies to This Discussion

Hi Peter.  I don't have an answer to your question, but I have, in the past, had good and bad experiences with OBJ's  and AutoCAD.  Usually if the files originate from Europe, I hold my breath.  No help I'm afraid.

I had two files from the same source. The only difference was that one was much bigger than the other with a much finer mesh. This was the one that didn't work. Anyway, I got them to send it to me as an iges file which I then translated into a sat file and imported into AutoCAD.

You can send me the file, if you like.  I'd estimate we're only reading about 75% of them reliably-- there are many poorly formed ones out there and I'm not supporting the entire standard in any case.  It isn't an area I've worked on a lot-- I did make some improvements for nXtStudio and I may be able to leverage some of that code.

RSS

Search

Translate

Latest Activity

Peter Milner replied to Peter Milner's discussion RenderFarm passes and tasks
"Hi Rich, That could be the answer. We have a new designer working at one of our other sites and she may have started a drawing from scratch instead of using a template. Therefore it would be set to use the standard rendering engine. Thank you for…"
7 hours ago
Rich Hart replied to Peter Milner's discussion RenderFarm passes and tasks
"Is the rendering engine set t be the Path Tracer on that machine? I see it is disabled on my computer if the engine is set to Standard. http://accurender.ning.com/forum/topics/tasks-in-render-farm-window"
7 hours ago
Peter Milner posted a discussion

RenderFarm passes and tasks

Got a strange glitch here.On one of our PCs, when sending a render to the Farm, the option to change the number of tasks is greyed out and stuck on 10. However, when a job is sent to the farm, it is automatically broken into 25 tasks.The PC is running the latest versions of nXt and the Farm and has been working perfectly up to  now.Any ideas?See More
13 hours ago
Peter Milner commented on Peter Milner's photo
Thumbnail

screend brochure 2019 05

"You may be right on the bricks. What looks like noise is actually the texture of the fabric."
13 hours ago
George Ioannidis commented on Peter Milner's photo
Thumbnail

screend brochure 2019 05

"Those are all exceptional work, Peter! Congratulations!On this one only: bricks look big to me, but maybe I am wrong. Also some areas in shadow look still a bit noisy."
Oct 16
Peter Milner posted photos
Oct 15
Roy Hirshkowitz replied to Roy Hirshkowitz's discussion AccuRender Studio for AutoCAD
"1-  On the Rendering Tab there is a popdown called Destination.  The option is called something like "Local Out of Process".  2-  No, installation will require admin access."
Oct 5
Mark Brinkman replied to Roy Hirshkowitz's discussion AccuRender Studio for AutoCAD
"I am an old Accurender user. I now need to try and re-create some old images from old models. (about 20 years old) I have now downloaded Accurender Studio, and now work with AutoCAD 2016 and 2017 I have 2 questions related to Accurender Studio: 1)…"
Oct 4

© 2019   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service