pathtracer sky - AccuRender nXt2024-03-29T06:52:21Zhttp://accurender.ning.com/forum/topics/pathtracer-sky?commentId=6293855%3AComment%3A437&feed=yes&xn_auth=noYes and it loads. Win 7 32 bi…tag:accurender.ning.com,2010-09-08:6293855:Comment:7752010-09-08T18:30:41.000Zakinlolu olugbojihttp://accurender.ning.com/profile/akinloluolugboji
Yes and it loads. Win 7 32 bit OS.
Yes and it loads. Win 7 32 bit OS. It's OK to manually change th…tag:accurender.ning.com,2010-09-08:6293855:Comment:7452010-09-08T14:22:13.000ZRoy Hirshkowitzhttp://accurender.ning.com/profile/RoyHirshkowitz
It's OK to manually change these keys-- you can add a third command in the same format as the other two without a problem. Remember that you have to change both HKLM and HKCU.<br />
<br />
I can't really figure out much to do here except wait and see if others have similar problems. Those registry keys should be written during installation and everytime you run the product. The fact that that's not happening is very interesting. There may be some security on your machine that I don't undertand.<br />
<br />
Can…
It's OK to manually change these keys-- you can add a third command in the same format as the other two without a problem. Remember that you have to change both HKLM and HKCU.<br />
<br />
I can't really figure out much to do here except wait and see if others have similar problems. Those registry keys should be written during installation and everytime you run the product. The fact that that's not happening is very interesting. There may be some security on your machine that I don't undertand.<br />
<br />
Can everyone else type "nxt" and have the product load? value holds the correct path…tag:accurender.ning.com,2010-09-08:6293855:Comment:7072010-09-08T11:33:35.000ZJan Verzelenhttp://accurender.ning.com/profile/janverzelen
value holds the correct path to the product. I never moved the programm from one folder to another.<br />
<br />
Now i manually changed the value in the commands section from AR to NXT and that did the job. Since changing things in regedit is very dangerous i switched back to the old settings. Don't know if this does something else then just changing the command from AR5 to NXT.
value holds the correct path to the product. I never moved the programm from one folder to another.<br />
<br />
Now i manually changed the value in the commands section from AR to NXT and that did the job. Since changing things in regedit is very dangerous i switched back to the old settings. Don't know if this does something else then just changing the command from AR5 to NXT. Stranger still-- I'm not sure…tag:accurender.ning.com,2010-09-06:6293855:Comment:5332010-09-06T15:36:17.000ZRoy Hirshkowitzhttp://accurender.ning.com/profile/RoyHirshkowitz
Stranger still-- I'm not sure I allow the thing to be unloaded.<br />
<br />
Yes, a complete uninstall is performed first. Something got confused in your case, though. It shouldn't happen unless you manually moved the thing from one folder to another. You can check whether any of the demand load keys are different--<br />
<br />
HKEY_CURRENT_USER -AND- HKEY_LOCAL_MACHINE\Software\Autodesk\AutoCAD\R18.0\ACAD-####:###\Applications\ACCURENDER<br />
<br />
value = LOADER holds a path to the product.
Stranger still-- I'm not sure I allow the thing to be unloaded.<br />
<br />
Yes, a complete uninstall is performed first. Something got confused in your case, though. It shouldn't happen unless you manually moved the thing from one folder to another. You can check whether any of the demand load keys are different--<br />
<br />
HKEY_CURRENT_USER -AND- HKEY_LOCAL_MACHINE\Software\Autodesk\AutoCAD\R18.0\ACAD-####:###\Applications\ACCURENDER<br />
<br />
value = LOADER holds a path to the product. Manually unloading the applic…tag:accurender.ning.com,2010-09-06:6293855:Comment:5092010-09-06T12:19:24.000ZJan Verzelenhttp://accurender.ning.com/profile/janverzelen
Manually unloading the application in autocad helps. After that i can use the "nxt" command to load it again. Does that means i'm running two versions? i tought that installing a new version deleted the old one.
Manually unloading the application in autocad helps. After that i can use the "nxt" command to load it again. Does that means i'm running two versions? i tought that installing a new version deleted the old one. Is it possible you're running…tag:accurender.ning.com,2010-09-05:6293855:Comment:4862010-09-05T23:29:38.000ZRoy Hirshkowitzhttp://accurender.ning.com/profile/RoyHirshkowitz
Is it possible you're running two different versions of AccuRender nXt? It does re-register everytime it loads-- so installing 222 and running 221 might cause the registry to revert. I'm running out of ideas here.<br />
<br />
<cite>jan verzelen said:</cite><blockquote cite="http://accurender.ning.com/forum/topics/pathtracer-sky#6293855Comment466"><div>everything looks allright here except for the commands portion, i only see AR5 and ARNXT</div>
</blockquote>
Is it possible you're running two different versions of AccuRender nXt? It does re-register everytime it loads-- so installing 222 and running 221 might cause the registry to revert. I'm running out of ideas here.<br />
<br />
<cite>jan verzelen said:</cite><blockquote cite="http://accurender.ning.com/forum/topics/pathtracer-sky#6293855Comment466"><div>everything looks allright here except for the commands portion, i only see AR5 and ARNXT</div>
</blockquote> everything looks allright her…tag:accurender.ning.com,2010-09-05:6293855:Comment:4662010-09-05T19:28:33.000ZJan Verzelenhttp://accurender.ning.com/profile/janverzelen
everything looks allright here except for the commands portion, i only see AR5 and ARNXT
everything looks allright here except for the commands portion, i only see AR5 and ARNXT If you're comfortable you can…tag:accurender.ning.com,2010-09-05:6293855:Comment:4402010-09-05T15:23:39.000ZRoy Hirshkowitzhttp://accurender.ning.com/profile/RoyHirshkowitz
If you're comfortable you can check some registry keys for me using regedit.<br />
<br />
These keys may exist in two different hives HKEY_LOCAL_MACHINE and HKEY_CURRENT_USER.<br />
<br />
The start of the key is Software\Autodesk\AutoCAD\r18.0 which is for 2010<br />
<br />
The next portion will be something like ACAD-####:### which identifies the vertical version (e.g. ACA) and the localized language.<br />
<br />
After that look for Applications\ACCURENDER\Commands. Your should see three commands listed there:<br />
<br />
AR5<br />
ARNXT<br />
NXT<br />
<br />
Again, if…
If you're comfortable you can check some registry keys for me using regedit.<br />
<br />
These keys may exist in two different hives HKEY_LOCAL_MACHINE and HKEY_CURRENT_USER.<br />
<br />
The start of the key is Software\Autodesk\AutoCAD\r18.0 which is for 2010<br />
<br />
The next portion will be something like ACAD-####:### which identifies the vertical version (e.g. ACA) and the localized language.<br />
<br />
After that look for Applications\ACCURENDER\Commands. Your should see three commands listed there:<br />
<br />
AR5<br />
ARNXT<br />
NXT<br />
<br />
Again, if you're comfortable, let me know what you find. windows 7 as administrator.tag:accurender.ning.com,2010-09-05:6293855:Comment:4372010-09-05T06:36:30.000ZJan Verzelenhttp://accurender.ning.com/profile/janverzelen
windows 7 as administrator.
windows 7 as administrator. Which OS? Are you an administ…tag:accurender.ning.com,2010-09-04:6293855:Comment:4042010-09-04T17:36:11.000ZRoy Hirshkowitzhttp://accurender.ning.com/profile/RoyHirshkowitz
Which OS? Are you an administrator on your machine?<br />
<br />
<cite>jan verzelen said:</cite><blockquote cite="http://accurender.ning.com/forum/topics/pathtracer-sky#6293855Comment400"><div>Thanks for the answer, i know what to do now.<br/><br/>about the "nxt" thing, i use the 222 build allright. acad 2010 64 bit. should i do something else first then simply typing "nxt"?</div>
</blockquote>
Which OS? Are you an administrator on your machine?<br />
<br />
<cite>jan verzelen said:</cite><blockquote cite="http://accurender.ning.com/forum/topics/pathtracer-sky#6293855Comment400"><div>Thanks for the answer, i know what to do now.<br/><br/>about the "nxt" thing, i use the 222 build allright. acad 2010 64 bit. should i do something else first then simply typing "nxt"?</div>
</blockquote>