problem with textures distribution - AccuRender nXt2024-03-28T17:59:01Zhttp://accurender.ning.com/forum/topics/problem-with-textures-distribution?feed=yes&xn_auth=noThank you very much Roy, I wi…tag:accurender.ning.com,2015-02-25:6293855:Comment:1137022015-02-25T15:27:07.243ZEnrico Ghenohttp://accurender.ning.com/profile/EnricoGheno
<p>Thank you very much Roy, I will try these setting</p>
<p>Thank you very much Roy, I will try these setting</p> Just got your model-- as expe…tag:accurender.ning.com,2015-02-25:6293855:Comment:1138012015-02-25T15:12:10.332ZRoy Hirshkowitzhttp://accurender.ning.com/profile/RoyHirshkowitz
<p>Just got your model-- as expected the model was located very far from the world coordinate system origin-- almost 6000 meters away. This will not work. To fix the problem I did the following:</p>
<ol>
<li>Switched the coordinate system to WCS using the _UCS command.</li>
<li>Switched out of perspective mode to make the drawing a little easier to work with.</li>
<li>Selected all of the objects and cameras in the model.</li>
<li>Used the move command to move the model close to…</li>
</ol>
<p>Just got your model-- as expected the model was located very far from the world coordinate system origin-- almost 6000 meters away. This will not work. To fix the problem I did the following:</p>
<ol>
<li>Switched the coordinate system to WCS using the _UCS command.</li>
<li>Switched out of perspective mode to make the drawing a little easier to work with.</li>
<li>Selected all of the objects and cameras in the model.</li>
<li>Used the move command to move the model close to (0,0,0)</li>
<li>Zoomed extents to see the model again.</li>
<li>Used one of the AutoCAD cameras to set a perspective view.</li>
</ol>
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/55262442?profile=original" target="_self"><img width="721" src="http://storage.ning.com/topology/rest/1.0/file/get/55262442?profile=RESIZE_1024x1024" width="721" class="align-full"/></a></p> Ho provato to move all the el…tag:accurender.ning.com,2015-02-24:6293855:Comment:1135012015-02-24T15:52:13.955ZEnrico Ghenohttp://accurender.ning.com/profile/EnricoGheno
<p><font><font>Ho provato to move all the elements on 0,0,0 but nothing better. </font></font></p>
<p><font><font>I load the 3D model</font></font></p>
<p><font><font>Ho provato to move all the elements on 0,0,0 but nothing better. </font></font></p>
<p><font><font>I load the 3D model</font></font></p> Change the coordinates back t…tag:accurender.ning.com,2015-02-24:6293855:Comment:1134052015-02-24T14:59:12.818ZRoy Hirshkowitzhttp://accurender.ning.com/profile/RoyHirshkowitz
<p>Change the coordinates back to WCS and see how far your model is from the origin. If the coordinates are large-- say greater than a few hundred meters, then you'll need to move the model.</p>
<p>Use the _MOVE command to select and move all of the geometry and any AutoCAD cameras closer to 0,0,0. If your views don't use cameras you will have to redo them. </p>
<p>You can also send me the model and I can take a look. If it doesn't fit here as an attachment, you can use the upload link under…</p>
<p>Change the coordinates back to WCS and see how far your model is from the origin. If the coordinates are large-- say greater than a few hundred meters, then you'll need to move the model.</p>
<p>Use the _MOVE command to select and move all of the geometry and any AutoCAD cameras closer to 0,0,0. If your views don't use cameras you will have to redo them. </p>
<p>You can also send me the model and I can take a look. If it doesn't fit here as an attachment, you can use the upload link under the Support/Forum menu item.</p>
<p></p> Ciao George ringrazio per la…tag:accurender.ning.com,2015-02-24:6293855:Comment:1130152015-02-24T12:09:46.591ZEnrico Ghenohttp://accurender.ning.com/profile/EnricoGheno
<p><font><font><font><font>Ciao George ringrazio per la risposta ..... mi potete esplicativi, come fare?</font></font></font></font></p>
<p></p>
<p>now just I put the origin UCS in an angle of th house</p>
<p><font><font><font><font>Ciao George ringrazio per la risposta ..... mi potete esplicativi, come fare?</font></font></font></font></p>
<p></p>
<p>now just I put the origin UCS in an angle of th house</p> It's not enough to put UCS or…tag:accurender.ning.com,2015-02-24:6293855:Comment:1131072015-02-24T12:01:06.485ZGeorge Ioannidishttp://accurender.ning.com/profile/GeorgeIoannidis
<p>It's not enough to put UCS origin close to your model. The model has to be MOVEd close to the absolute origin (world 0,0,0). :)</p>
<p>It's not enough to put UCS origin close to your model. The model has to be MOVEd close to the absolute origin (world 0,0,0). :)</p> Ciao Roy, I try to setting th…tag:accurender.ning.com,2015-02-24:6293855:Comment:1132062015-02-24T09:12:56.094ZEnrico Ghenohttp://accurender.ning.com/profile/EnricoGheno
<p>Ciao Roy, I try to setting the units and coordinates 0,0,0 near the house, but with small improving, the problems are the same. Look the picture</p>
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/55262350?profile=original" target="_self"><img width="721" src="http://storage.ning.com/topology/rest/1.0/file/get/55262350?profile=RESIZE_1024x1024" width="721" class="align-full"/></a></p>
<p>Ciao Roy, I try to setting the units and coordinates 0,0,0 near the house, but with small improving, the problems are the same. Look the picture</p>
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/55262350?profile=original" target="_self"><img width="721" src="http://storage.ning.com/topology/rest/1.0/file/get/55262350?profile=RESIZE_1024x1024" width="721" class="align-full"/></a></p> Thank you Olugboji, I will se…tag:accurender.ning.com,2015-02-24:6293855:Comment:1131052015-02-24T08:20:09.990ZEnrico Ghenohttp://accurender.ning.com/profile/EnricoGheno
<p><font><font>Thank you Olugboji, I will see these good images </font></font></p>
<p><font><font>Thank you Olugboji, I will see these good images </font></font></p> Go through the gallery see so…tag:accurender.ning.com,2015-02-23:6293855:Comment:1130112015-02-23T22:59:48.787Zakinlolu olugbojihttp://accurender.ning.com/profile/akinloluolugboji
<p>Go through the <a href="http://accurender.ning.com/photo" target="_blank">gallery</a> see something you like and ask how it is being done. You can also attach an image of what you like your rendering to look like.</p>
<p>Go through the <a href="http://accurender.ning.com/photo" target="_blank">gallery</a> see something you like and ask how it is being done. You can also attach an image of what you like your rendering to look like.</p> What don't you like about it?…tag:accurender.ning.com,2015-02-23:6293855:Comment:1126272015-02-23T18:36:04.268ZRoy Hirshkowitzhttp://accurender.ning.com/profile/RoyHirshkowitz
<p>What don't you like about it? I'm not sure I'm the right person to help you with this-- but someone should be able to.</p>
<p>What don't you like about it? I'm not sure I'm the right person to help you with this-- but someone should be able to.</p>