AccuRender nXt

advanced rendering for AutoCAD

I needed to format my PC ,  now I reinstalled all sofwares, including AUTOCAD 2013 64 bits, and the NXT version,  ArnXt - 64_0329.

My problem is, I can`t load the file " AccuRender nXt64, and AccuRender nXt_18_64 into the Autocad load/unload Applications, whem I type the load comand, I received the message "Unable to load Accurender nXt64.Arx.file".

Has another way to do that.

Views: 34

Reply to This

Replies to This Discussion

Try these instructions, using _appload to load the “_19” arx for AutoCAD 2013:

Normally nXtRender registers its commands with AutoCAD during installation. On occasion, this mechanism may fail. In this case you will need to manually load nXt the first time you run it in a particular version of AutoCAD. Use the following procedure:

1.      Type _appload at the command line.

2.      Navigate to the folder where nXt was installed. This is normally C:\Program Files\AccuRender nXt

3.      Select one of the following files depending on your platform:

 

·         AccuRender nXt.arx -OR- AccuRender nXt64.arx (AutoCAD 2007 – 2009)

·         AccuRender nXt_18_.arx -OR- AccuRender nXt_18_64.arx (AutoCAD 2010 – 2012)

·         AccuRender nXt_19_.arx -OR- AccuRender nXt_19_64.arx (AutoCAD 2013 – 2014)

·         AccuRender nXt_20_.arx -OR- AccuRender nXt_20_64.arx (AutoCAD 2015- 2016)

·         AccuRender nXt_21_.arx -OR- AccuRender nXt_21_64.arx (AutoCAD 2017)

·         AccuRender nXt_22_.arx -OR- AccuRender nXt_22_64.arx (AutoCAD 2018)

 

4.      Press Load

 

Check the AutoCAD command line to verify that the application loaded without error. At this point you should be able to type nxt or ar5 to launch the application. You should not have to repeat this procedure again for this version of AutoCAD. Simply typing nxt or ar5 at the command prompt should cause nxt to load. You may need to repeat this procedure if you install another version of AutoCAD.

 

It’s also possible that you downloaded the wrong install file, like the 32 bit version when you needed the 64 bit install file.. If you are on a 64 bit machine, make sure that you are running one of the ARX modules that contains _64” in the name.

Rich, thanks for your help.

RSS

Search

Translate

Latest Activity

Roy Hirshkowitz replied to Steve Wojtynek's discussion Delete Unused Materials?
"Use AutoCAD's purge command.  The AccuRender materials are just AutoCAD materials with some extra data on them-- they have "accurender" as a prefix. Right click on accurender's material list and select Refresh after this to…"
22 hours ago
Steve Wojtynek posted a discussion

Delete Unused Materials?

I typically create new or add ArMaterials (from a library of materials I'm building) to whatever model I'm currently working on.  I change my mind on materials along the way and when I'm finished, I typically have about twice as many materials than the ones that are actually assigned to layer names in the model.  Is there a way to "purge" unused materials along the way or when finished?See More
22 hours ago
Roy Hirshkowitz replied to Peter Milner's discussion Render farm OS
"Use a different shared folder for the ArStudio farm.  Otherwise, no-- nXtRender won't be affected by anything you do here.  I would use a different shared folder. There are (or will be shortly) two ways to do cloud…"
yesterday
Peter Milner replied to Peter Milner's discussion Render farm OS
"Okay, I'll give it a go. I presume it won't affect the nXtRender software. Thanks for looking into it. Just out of interest, how many processors will the cloud use?"
yesterday
Roy Hirshkowitz replied to Peter Milner's discussion Render farm OS
"BTW, the item I'm finishing up is cloud rendering-- which may interest you as a way of easily (and inexpensively) expanding your in-house farm when you need more rendering power."
yesterday
Roy Hirshkowitz replied to Peter Milner's discussion Render farm OS
"I've got a holiday weekend and one item to finish, then I can look at this.  On first glance, it looks possible to do, but I don't have an r18 to test with. In the meantime, when you get a chance, try just seeing if the farm nodes and…"
yesterday
Peter Milner replied to Peter Milner's discussion Render farm OS
"All in AutoCAD."
yesterday
Roy Hirshkowitz replied to Peter Milner's discussion Render farm OS
"Wow 2011!  It may be possible to do-- it looks like they did have .net support back then.  I'll look into it. Are you modeling in AutoCAD or with other software?  "
yesterday

© 2017   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service