AccuRender nXt

advanced rendering for AutoCAD

How to you compare Intel and AMD processors. i3, i5 and i7 I know but when it comes the AMD I sometimes have to go by prices and that never cuts it as other factor are involve and even among brands same processor rating comes in various prices. 

Views: 193

Reply to This

Replies to This Discussion

Here is a good eample!

Which has a more powerful processor the AMD Six Core or the Intel Core i5?

For nXt, use clockSpeed X nPhysicalCPUs as a decent rule of thumb performance index.  The hyperthreading used by the new Intel CPUs will make them perform a little better (~10%) than this index would indicate.

Performance of other applications may be very different.

So the AMD will be 6 x 2.7 = 16.2, will the i5 will be 4 x 3.4 = 13.6. So the winner here is the AMD right?

The rule of thumb tells you the two machines will be very close with regard to nXt performance, especially when you take into account the hyperthreading bonus for the i5.  I would choose between these two systems based on other factors.  

For example, the i5 will almost certainly be faster for other software, including AutoCAD.  The AMD machine, on the other hand, could be cheaper.

Thanks will put that in consideration ie the hyperthreading 

Nice site with CPU benchmarks comparison:

http://www.anandtech.com/bench/CPU/42

Chose two CPUs to see the overall performance. There is also multithreaded rendering benchmarks - Cinema, 3DSMax etc.

My two cents.....

AMD for workstation computers        -           Intel for renderfarm computers

Also costing on top shelf i7's big question on your bang for your buck vs top AMD.

I also find AMD can be hard on RAM chips, have had a lot burn out.

RSS

Search

Translate

Latest Activity

Tom Jarvi posted photos
Mar 12
OYEBANJI EMMANUEL posted a photo

Render 1 copy (1)

This is a remake of one of Peter Milner's scenes. I dont have the file. I photo-matched it in sketchup and rendered in nxt render for autocad.I just retouched it and increased the resolution.
Dec 20, 2023
OYEBANJI EMMANUEL posted a photo

Render 1

This is a remake of one of Peter Milner's renders.I dont have the file. I photo-matched the scene in sketchup and rendered with nxt render in autocad.I replicated it.
Dec 18, 2023
OYEBANJI EMMANUEL posted a photo

00001 copy

An office render i did recently.Critics and comments are welcome.Its one of the frames of a walkthrough animation i did recently.I used sketchup to model, exported to autocad and rendered with nxt render.
Nov 22, 2023
OYEBANJI EMMANUEL posted a discussion

nxt render Course/tutorial

Good day Sir,I want to know the number of people that would be interested in a nxt render course because i plan to create one.Please send me a prompt reply if you are interested.Just sayHi am in.Checkout a walkthrough i just created recently with nxt render for autocad after modelling in sketchup and then post-producing in photoshop.…See More
Nov 5, 2023
OYEBANJI EMMANUEL replied to N` Goraw's discussion ACCURENDER NXT FOR WALKTHROUGHS
"Good day Sir, Hope this message meets you well. I just completed a short walkthrough of an office. Its down here https://drive.google.com/file/d/1L4p5Iyiq5MiSK137UT1eH3POuiI5ZLDA/view?usp=drive_link"
Nov 5, 2023
Maciej posted photos
Jun 6, 2023
Marko Stout replied to Peter Milner's discussion Comotion
"Is comotion still om progres? I need to make some moving parts in NXT!!"
Apr 7, 2023

© 2024   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service