AccuRender nXt

advanced rendering for AutoCAD

I JUST ERASE MY PC AND IM TRYING TO INSTALL AGAIN ACCURENDER BUT MY RPS WONT OPEN

Views: 306

Reply to This

Replies to This Discussion

What version did you install, or just tell me what was the name of the install file that you ran?

i just download arnxt64_0358-PH24 giving my lic. number and it give this link

I do not see what you refer to as a link.

Are you able to the AccuRender nXt to appear in AutoCAD when you type in the command NXT?

I GOT MY INVOICE NUMBER, MY LIC. NUMBER SO WHAT HAPPENS...

I WENT TO YOUR PAGE AND I GIVE MY LIC. NUMBER THEN THE PAGE GIVE A LINK TO DOWMLOAD, SO I DOWNLOAD BUT I OPEN AUTOCAD THEN I TRY TO OPEN THE LIC. PART (RSP) BUT IT WONT OPEN..I DOWNLOAD 

arnxt64_0358-PH24 

THIS THE PAGES  I USE TO DOWNLOAD

Attachments:

Im using Autocad 2010 64, windows 7 pro maybe I domloading the wrong file

Yes, your picture shows the 32 bit install.

You need the one with the "64" in the name. Download and install that one.

arnxt64_0358-PH24.exe

Here is the direct link to the 64 bit download:

http://www.renderplus.com/downloads/nXtRender/arnxt64_0358-PH24.exe

Please try that.

thanks, I will try and let you Know later, I apreciate the help ...

hello.. I did install de file you gave me but It wont open the RSP lic. to activate.. now what happens..

During the install, we install six  MicroSoft redistributables in a quiet mode.

They are all located in this folder:

   C:\Program Files\AccuRender nXt\RPS_SUPPORT\redist

One of these probably needs to be reinstalled and repaired.

Could you rick click on each one of them and select Run as Administrator, responding "Repair" to the ones that ask what to do.

It might also help to reboot at this point.

Then restart AutoCAD and see if the nXt RPS License dialog will appear for you.

ok.. the nXt Lic. dialog opens and is activate, thanks a lot... but while autocad opens this happens ( I send atachment)... it said that unable to loadC:\Programas Files\Accurender nXt\Accurender nXt_18_64.arxfile.... but after autocad opens everithing is ok.... thanks for the tools to resolve this situation... but this error can be solve..??

Attachments:

RSS

Search

Translate

Latest Activity

Rich Hart replied to Brittany Watson's discussion Continuous Recessed Lighting Issues
"I see that if I turn the soffit layer off, that those can lights on the right are working. So I assume the soffit is blocking the light. Unfortunately, I'm not able to try moving the can lights down for some reason. I can try looking into this…"
yesterday
Brittany Watson replied to Brittany Watson's discussion Continuous Recessed Lighting Issues
"I apologize, they are the smaller can lights on right soffit side of the arched ceiling, the bigger ones on the opposite side (left) are working correctly. They do work when the light source is pulled out of the can object or out of the soffit, so…"
yesterday
Rich Hart replied to Brittany Watson's discussion Continuous Recessed Lighting Issues
"Unfortunately, the model was still just too large for my machine. After about 15 minutes I had to turn off the computer so that I could do something else while it was rendering.. Could you give me any idea of where the lights are that don't…"
yesterday
Brittany Watson replied to Brittany Watson's discussion Continuous Recessed Lighting Issues
"Just sent. Thank you for the quick response!"
yesterday
Rich Hart replied to Brittany Watson's discussion Continuous Recessed Lighting Issues
"Can you send us a model where this is happening, to see if we can duplicate it here? As small a model as possible would be appreciated. You can use this link to send it to us: https://renderplus.com/wp2/uploads/ Thanks, Rich"
Wednesday
Brittany Watson posted a discussion

Continuous Recessed Lighting Issues

Hi I use AutoCAD Architecture and have been having on going problems with a recessed can light block. I have completed 3 renderings now in which I have had to spend days trying to get my recessed lighting to work. Other lights work, and occasionally some of the can recessed lights will show up. I have exploded the block and added them individually, I have aimed the light and rotated it every which way, but most of the time nothing works.  I have tested out the problem on my current rendering…See More
Wednesday
Roy Hirshkowitz replied to Peter Milner's discussion Accurender Studio cloud rendering
"I pulled the option to use my Azure Batch cloud out of the current product.  There wasn't much interest in it.  You can set up your own Azure account with Microsoft and use it, it's not trivial but also not too hard.  I…"
Feb 21
Peter Milner posted a discussion

Accurender Studio cloud rendering

How much does it cost to use cloud rendering?See More
Feb 21

© 2020   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service