AccuRender nXt

advanced rendering for AutoCAD

Nxt trabaja con AutoCad 2012?

Si alguien me puede ayudar, agradecido de antemano

Visitas: 906

Respuestas a esta discusión

Permalink Responder para Roy Hirshkowitz el septiembre 8, 2011 a las 9:38am
Yes.  It does work.  Let me know if you're having any problems.
Permalink Responder para Fabio el septiembre 8, 2011 a las 12:52pm
En  Autocad 2012 cuando ejecuto ar5 o nxt  no abre accurender, que debo hacer
Permalink Responder para akinlolu olugboji el septiembre 8, 2011 a las 1:38pm
Works well here too, are you on 32 or 64 bit?
Permalink Responder para Fabio el septiembre 8, 2011 a las 1:50pm
32 bit
Permalink Responder para akinlolu olugboji el septiembre 8, 2011 a las 3:00pm

You might need to appload the *.arx file, manually?

 

Permalink Responder para Roy Hirshkowitz el septiembre 8, 2011 a las 3:38pm
Follow these instructions.  Let me know if it works.
Permalink Responder para Fabio el septiembre 8, 2011 a las 5:51pm
ya gacrias me funciono, solo desintale y volvi a instalarlar el autocad y tambien el Nxt

RSS

Search

Translate

Latest Activity

David Leigh posted a discussion

Image does not render correctly in nxt but does in autocad render

HI GuysThe pipework is generated using an external package. The majority of the pipework renders in nxt, but there are a few pipe spools that disappear. I have had a look at their properties and they appear to be the same. However the pipes do render using the AutoCAD standard render. Your help would be greatly appreciatedKind regardsDavidSee More
1 hour ago
0 Comments
akinlolu olugboji commented on Chukwuemeka Agwu's photo
Thumbnail

Meeting Room

"Putting Area lights behind external windows help the overhall ambiance. Also rendering with no furniture first makes rendering go faster so when ok with the lighting then you can added the furnitures for the final rendering"
Wednesday
Chukwuemeka Agwu commented on Peter Milner's photo
Thumbnail

ambus 2009 brochure mood shot

"Great job! I really like the ambience."
Wednesday
Chukwuemeka Agwu posted photos
Thumbnail
Thumbnail
Thumbnail
Jul 18
Roy Hirshkowitz replied to Thorsten Hedrich's discussion Computer restarts
"You can experiment with this setting if you want- sometimes 99% works  fine and slightly improves performance.  Or you can leave it alone-- these heat shutdowns are not really very good for a computer."
Jul 18
George Ioannidis replied to Thorsten Hedrich's discussion Computer restarts
"Super! Another useful lesson learned. Thanks Roy!"
Jul 17
Thorsten Hedrich replied to Thorsten Hedrich's discussion Computer restarts
"Abracadabra; adjusting 'Maximum Processor State' (in 'Processor Power Management') -so it does not exceed 95% of its capabilities seems to be doing the trick - as Roy pointed out. Thanks! Will try new thermal compound anyway -…"
Jul 17
George Ioannidis replied to Thorsten Hedrich's discussion Computer restarts
"Doesn't that mean that turning your CPU 95% down it will run only at 5% of its full horsepower? Does it mean that the rendering will then run 20X longer than of full CPU throttle? Or did you mean to set the CPU usage to 95%? Are those 5% enough…"
Jul 15

© 2017   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service