AccuRender nXt

advanced rendering for AutoCAD

Roy Hirshkowitz's Comments

Comment Wall (18 comments)

You need to be a member of AccuRender nXt to add comments!

Join AccuRender nXt

At 10:23am on June 30, 2016, FRANCIS SIAW said…

MR ROY PLEASE DO WE HAVE 3D WEAR HOUSE FOR NXT RENDER?

At 3:36am on January 26, 2015, traian m said…

Al hart /span>al.hart@renderplus.com>

6/18/13
to meRichard
traian,

Your Revit order in November 2011 was for license RVLD4037L. What is not working in Revit for you?

Your AutoCAD License is XAMC04487K.

You can download the latest version of nXtRender for AutoCAD from:
this was a mail from al hart about my non working revit licence.
when I asked for an upgrade, they told me I had to pay for the new version.
This is not fun, the old one never worked. And I'm not sure if the new one works. You see, there is no support, they do not answer in the forum, and instead it was you. 
The other issue, the ADT materials, if there is not possible to seamless integrate NXT in ADT (ACA) then it is a must to have updated step by step tutorials, otherwise we are obliged to build averything by hand in plain acad 3d entities, and it's cumbersome to update everything
with best regards
tm
At 2:24am on January 23, 2015, traian m said…

well, I was happy with the autocad version of accurender, so I decided to buy even a revit licence, because our office is migrating to revit. It never worked, soI talked to them about that release . Nothing happened. then they came with a new release but I was supposed to pay for an upgrade ( which I'm quite unsure if it works) . Look silly if I have to pay for somthing that does not work, then pay again wout having any clue if the new one will work. that about revit. Generally is quite confusing right now about who's who and where the border goes between the acad and revit opperation. the people on the revit side you are pointing at, write at times even on the acacd forum. 

about acad ACA/ADT materials , I'll try the trick , but somehow it 's cumbersome if I have to go outside NXT in order to assign NXT materials to entities.

thank you for your mail anyhow. I greatly appreciate your work.

best regards

At 12:34am on January 22, 2015, traian m said…

I bought nxt for revit and it never worked

a shame

moreover, I'm trying to get an answer about how to assigt nxt materials to autocad ADT entities, like windows, walls and the like. there are several poats about this issue here and there but I never managed to solve this enigma. So i'm left with two alternatives-to render in native revit, or to construct everithing with plain autocad entities and render with nxt, wich is time consuming.

At 9:16am on January 15, 2015, Aguinaldo Marinho said…
How do I buy NXT to REVIT 2015?
I already have NXT to AutoCad.
I'm upgrading to REVIT and wish the NXT as surrender!
At 3:12am on April 4, 2014, hoai hai bui said…

Hi Roy

I want to ask the following issues:
when I put the image in bitmap format bump material is skewed image after rendering. Guide me how to fix it.

Thank you very much!!!

At 11:12am on June 24, 2012, Aguinaldo Marinho said…

In AR3 was how to render fonts in Windows ... You typed the letters of any Windows font, and apply the material and everything went right .... I could not do the same NXT .... Create letters I had to manually ... how to render the letters typed by AUTOCAD??

At 9:06pm on June 23, 2012, alberto reyes said…

not not at all. yes the fore ground is what i was worry about i pasted from a image weak and i think it lost a detail i do that i gona change it. and reposted again later and thanks that is what i want a honest true thank again i upload after i refinish 

thank roy

At 5:30pm on June 22, 2012, alberto reyes said…

roy i really apreciate your comment about my latest work thanks, is part of a proyect for arquitectural contest in dominican republic  let me know about the images.

ar.

At 5:42am on March 29, 2012, Marcos Oliveira said…

ONDE VC FAZ OS DESENHOS? QUAL O PROGRAMA?

At 1:27pm on March 28, 2012, Marcos Oliveira said…

Oi, pode me tirar um duvida?

Qual é o renderizador q vc usa ora fazer as imagem, tu cria no auto cad, e faz as rederizações qual programa? obrigado

At 6:49am on February 24, 2012, Mattos said…

Bom dia Roy! Estou com dificuldades ao ADD plantas e e arvores, em alguns arquivos  eles ficam gigantes, e em alguns ficam normal, onde,quando ou como corrijo essa questão de escala das plantas, seria antes de iniciar o NXT, ou na hora de criar o projeto em DWG,

Agradeço  muito se puder me auxiliar, pois estou sempre  exportando os arquivos  DWG para ambientes onde as plantas estão na escala, com isso o arquivo fica muito grande mesmo depois de purgar!!

Att: MATTOS

At 6:32pm on February 22, 2012, barak zippor said…

oof ...  i think i got it right. just typed the wrong characters. why are those key so long ?

At 6:00pm on February 22, 2012, barak zippor said…

hi roy. been a user and a fan for almost 20 years. just bought the nxt upgrade. got a e-licence number and a cd-key . tried to type them into the "paste product key" window (what is the product key ? i got a cd-key ... are they the same ?). keep getting the same window with no result.

At 4:20am on July 16, 2011, kk said…
Hi...I would like to know this license is for single user or multiple user? Normally how you control the license? For example, now i install this plug in software into computer A, suddently i change my mind , i install again this software into computer B, is there any problem occur? Do you have any extra charges for the upgrade version?
At 1:53pm on February 28, 2011, Larry McLean said…

Roy,

       I think I see what I was doing wrong. Seems to be working fine now.

       Thank you for your help and patience with me.

                                                                                          Larry McLean

At 11:05am on February 7, 2011, Rey F. Rosario Berrios said…
Hola Roy, en diciembre adquiri mi licencia full version de Nxt estoy tratando de establecer los settins para el render interior de esta cocina pero cuando trato de renderizar el sistema se torna lento apenas llega a 6 pases en 40 minutos. Yo he creado varios materiales en desplazamiento como lo es el piso y los mosaicos para la cocina, no se si esto tiene que ver. Mi sistema es Windows XP Sp3, AMD Athlon (tm) 64X2 Dual Core 4200+2.21 GHz, 3.00 gb of RAM. No se si es problema del sistema o no estoy procediendo bien con los ajustes.
At 9:06am on January 25, 2011, Jorge Javier Lara Domínguez said…
Hola Roy... Gracias por los tips para mejorar el trabajo, tengo una duda, me pedias te enviara el modelo 3d de la recamara?

Search

Translate

Latest Activity

Daniel Hargreaves posted a discussion

Accustudio

I know this is hard to believe, but Accustudio is over 20 years old. It has been quiet for a couple of years now at the site. I'm looking to hand it off to the next generation. Is there anyone interested in working on the site and eventually taking over the ownership of it?See More
Tuesday
Roy Hirshkowitz replied to Peter Milner's discussion AR Studio texture editing
"Currently only one texture per component and one bump map.  There is a blended material which allows more complex permutations-- most people do texture blending in photoshop. Solid textures refer to the granite/marble/wood procedural…"
Monday
Roy Hirshkowitz replied to Peter Milner's discussion AR Studio testing
"Yes, it will be different.  Typing arstudio should be roughly the same operation as "running a quick test render"-- it may be a little slower, and the first time you type it, it will certainly be slower (it was before). …"
Monday
Peter Milner replied to Peter Milner's discussion AR Studio texture editing
"A further question: What is a solid texture?"
Nov 28
Peter Milner replied to Peter Milner's discussion AR Studio texture editing
"Okay. Another question on textures: In nXt you can layer different textures and bump maps to create a more complex material. For example, the Oak veneer material (image attached) uses two bump maps: one for the grain and one for the flecks. In…"
Nov 28
Peter Milner replied to Peter Milner's discussion AR Studio testing
"It's more that, when putting a render together, I work on the model, run a quick test render, go back to the model to adjust/add things, run a quick test render etc etc. Having to close studio down and then re-open it every time I want to…"
Nov 28
Roy Hirshkowitz replied to Peter Milner's discussion AR Studio texture editing
"For AutoCAD I don't think you need to manipulate this-- leaving it alone should work.  It's there for other applications (Rhino, Sketchup, etc.) which permit multiple sets of texture coordinates on the same mesh-- native AutoCAD…"
Nov 27
Roy Hirshkowitz replied to Peter Milner's discussion AR Studio testing
"There's an autocad command for tagging objects as lights-- it's called something like arstudiolight-- I'll check. ***** You can start an out-of-process final rendering and close ArStudio down and continue to work without shutting the…"
Nov 27

© 2019   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service