AccuRender nXt

advanced rendering for AutoCAD

Okay, a couple more questions.

When AR Studio is running inside AutoCAD, I can't work on the CAD model unless I close Studio down. Is this correct behaviour?

How do I add a new light in Studio? I can edit existing nXt ones, but can't see how to add a brand new light source.

Views: 83

Reply to This

Replies to This Discussion

Just tried tweaking the view of the render and now the pre-render preview doesn't match the preview during rendering (see screen shots below).

Okay. It appears to only match for the original window size when Studio is launched.

Changing the window size from large to small, or vice versa causes a mismatch.

I'll see if I can reproduce-- thanks.

There's an autocad command for tagging objects as lights-- it's called something like arstudiolight-- I'll check.

*****

You can start an out-of-process final rendering and close ArStudio down and continue to work without shutting the rendering.  It's on the Destination popdown of the Render tab.  I think this is what you mean.

It's more that, when putting a render together, I work on the model, run a quick test render, go back to the model to adjust/add things, run a quick test render etc etc.

Having to close studio down and then re-open it every time I want to change something greatly slows the process down.

I've never used AutoCAD directly for any rendering stuff - lights, cameras, textures etc. I've always done it through Accurender. Looks like I'll have to learn something new.

One other point: I find the render window navigation very clunky, as to navigate you have to keep clicking on different buttons for different types of movement. The nXt walkabout worked extremely well as you could control your view with just the mouse (left button-swivel left/right/up/down, right button - move left/right/up/down, scroll wheel - move forwards/backwards).

Yes, it will be different.  Typing arstudio should be roughly the same operation as "running a quick test render"-- it may be a little slower, and the first time you type it, it will certainly be slower (it was before).  Hopefully, it will make up for that with the immediate feedback you get on material changes, etc..

The few additional commands are not really "using AutoCAD directly"-- they're my commands.  They can be easily located on a palette and/or toolbar that says "AccuRender Studio" on it.

If you select the pointer tool on the render window (it's selected by default), the right mouse button and the scroll wheel gives you access to all the navigation functions like before.  Using the shift and ctrl keys modify these for panning and walking respectively.

RSS

Search

Translate

Latest Activity

Rich Hart replied to Paul Jackson's discussion Bricscad
"Unfortunately, we don't have a version that works with BricsCAD now, and that older trial version cannot be reinstated."
Jun 19
Alfons Akamp replied to Paul Jackson's discussion Bricscad
"Ich habe hier auch eine nxtrender Version für Bricscad 15. Die sieht anders aus, als die von Acad. Leider ist auch bei mir der Testzeitraum schon lange abgelaufen. Gibt es die Möglichkeit mir eine Testlizenz dafür zuzuschicken??…"
Jun 19
George Ioannidis commented on Chris Fox's photo
Thumbnail

Bedroom

"Another good rendering. Those two photoshopped reading lights are not looking good though. They don't follow the perspective, the left one is higher than the right one. Also, they are supposed to be turned on (judging from the light on wall…"
Jun 15
George Ioannidis commented on Chris Fox's photo
Thumbnail

Single Family Home

"Great image as always. I would just blur the tree shadow on the lawn to match soft shadows on the building. Nice blending of cut-out greenery. Excellent job."
Jun 15
George Ioannidis commented on Chris Fox's photo
Thumbnail

Railroad kitchen

"Very nice rendering Chris! The only thing that distracts me is the fruit bowl. It's too evidently pasted in PS.  Another thing (nothing to do with rendering) is the microwave above the stove. I would rather expect a cooker hood there."
Jun 15
akinlolu olugboji posted a discussion

trim and extension command

On AutoCad 2021.The trim and extension command works funny. I initiate the command then click the cutting edge (press entre) then click the lines I need to trim or extend.Now I initiate the command and as soon as I click the object selected trims or extend.  How can I correct this, it is really affecting my work?See More
Jun 14
Chris Fox posted photos
Jun 12
ebenezer attah koomson posted photos
Jun 3

© 2020   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service