I GOT AN ERROR WHILE RENDERING IN AUTOCAD 2010 - AccuRender nXt2024-03-28T12:29:45Zhttps://accurender.ning.com/forum/topics/i-got-an-error-while-rendering-in-autocad-2010?commentId=6293855%3AComment%3A227305&feed=yes&xn_auth=noI'm guessing it's the same pr…tag:accurender.ning.com,2021-08-23:6293855:Comment:2273232021-08-23T16:08:29.994ZRoy Hirshkowitzhttps://accurender.ning.com/profile/RoyHirshkowitz
<p>I'm guessing it's the same problem. nXt has to be present for a conversion to work properly with a drawing that has nXt data. That's a known issue. Converting using any other method probably will not work properly if you need to use nXt on the converted drawing.</p>
<p>I'm guessing it's the same problem. nXt has to be present for a conversion to work properly with a drawing that has nXt data. That's a known issue. Converting using any other method probably will not work properly if you need to use nXt on the converted drawing.</p> I think Norton mentioned that…tag:accurender.ning.com,2021-08-22:6293855:Comment:2271222021-08-22T04:45:25.586ZGeorge Ioannidishttps://accurender.ning.com/profile/GeorgeIoannidis
<p>I think Norton mentioned that he did the conversion using TrueView, not the AutoCAD itself. He is still on ver. 2010 I suppose, otherwise he could do renderings directly in 2018. Maybe TrueView isn't quite versionwise correct as regards to conversions of 3D drawings from the newer to the older versions DWG, who knows :)</p>
<p></p>
<p>I think Norton mentioned that he did the conversion using TrueView, not the AutoCAD itself. He is still on ver. 2010 I suppose, otherwise he could do renderings directly in 2018. Maybe TrueView isn't quite versionwise correct as regards to conversions of 3D drawings from the newer to the older versions DWG, who knows :)</p>
<p></p> One additional thought.
A kn…tag:accurender.ning.com,2021-08-01:6293855:Comment:2273052021-08-01T15:18:18.290ZRoy Hirshkowitzhttps://accurender.ning.com/profile/RoyHirshkowitz
<p>One additional thought. </p>
<p>A known issue when saving drawings to a previous version is that nXt must be loaded and running before you convert the drawing. Try the following:</p>
<p></p>
<p>1. Open your 2018 drawing in AutoCAD.</p>
<p>2. Start nXt by typing "nXt" or however you normally start it.</p>
<p>3. Save the drawing to a previous format such as 2010.</p>
<p></p>
<p>See if this procedure prevents the crash.</p>
<p></p>
<p></p>
<p>One additional thought. </p>
<p>A known issue when saving drawings to a previous version is that nXt must be loaded and running before you convert the drawing. Try the following:</p>
<p></p>
<p>1. Open your 2018 drawing in AutoCAD.</p>
<p>2. Start nXt by typing "nXt" or however you normally start it.</p>
<p>3. Save the drawing to a previous format such as 2010.</p>
<p></p>
<p>See if this procedure prevents the crash.</p>
<p></p>
<p></p> Interesting. I'm not sure wh…tag:accurender.ning.com,2021-08-01:6293855:Comment:2272172021-08-01T14:41:05.755ZRoy Hirshkowitzhttps://accurender.ning.com/profile/RoyHirshkowitz
<p>Interesting. I'm not sure what I can do about it-- the oldest AutoCAD I have available for testing is 2013. AutoCAD 2010 is actually 12 years old which is an eternity in software. You can try sending me a simple converted drawing (2010 .dwg) that you verify is crashing and I'll take a look at it. I'm not too optimistic, though.</p>
<p>Interesting. I'm not sure what I can do about it-- the oldest AutoCAD I have available for testing is 2013. AutoCAD 2010 is actually 12 years old which is an eternity in software. You can try sending me a simple converted drawing (2010 .dwg) that you verify is crashing and I'll take a look at it. I'm not too optimistic, though.</p> yes... is every 3d model that…tag:accurender.ning.com,2021-07-31:6293855:Comment:2272122021-07-31T12:14:28.666Znorton torreshttps://accurender.ning.com/profile/nortontorres
<p>yes... is every 3d model that I I import from autocad 2018 to autocad 2010 and it dosent matter that I convert the drawing in trueview to dwg 2010 it continues the error, it happens this way, I open the drawing in autocad 2010 then I open accurender to render the drawing and then it gives me the error.</p>
<p>yes... is every 3d model that I I import from autocad 2018 to autocad 2010 and it dosent matter that I convert the drawing in trueview to dwg 2010 it continues the error, it happens this way, I open the drawing in autocad 2010 then I open accurender to render the drawing and then it gives me the error.</p> If it's crashing consistently…tag:accurender.ning.com,2021-07-30:6293855:Comment:2273022021-07-30T14:12:59.015ZRoy Hirshkowitzhttps://accurender.ning.com/profile/RoyHirshkowitz
<p>If it's crashing consistently with a particular drawing, let me know, there may be a problem. Please don't use all caps when composing forum messages.</p>
<p>If it's crashing consistently with a particular drawing, let me know, there may be a problem. Please don't use all caps when composing forum messages.</p>