AccuRender nXt

advanced rendering for AutoCAD

Has anyone successed in importing sketch up models with the NXT widget?

Views: 258

Reply to This

Replies to This Discussion

I have not.

Why not to do it using AutoCAD importer?

This success recorded via the autocad importer route is no better than that of NXT?

My old horse AR5 ver. 1.0.318 did this:

With 3ds files it's the bomb.

I usually open the SketchUp file and export it to a 3DS file....then add the 3DS file into ACAD via nXt.

Although....some issues as of late...see http://accurender.ning.com/forum/topics/tex-mesh-crashes?xg_source=...

John

It looks like it still works somewhat with SketchUp 8 and older models.

I'll see if I can fix it to support models through SketchUp 2018, and take a look at the material mapping problems that I'm seeing.

Thanks...

I posted a new version where Importing SketchUp models is working for all SketchUp files through version 2018, for 64 bit machines.

Note: the 32 bit version can only import SketchUp models saved from SketchUp 2016 and earlier versions, since SketchUp's 2017 and 2018 SDKs now only support 64 bit.

This was tested for AutoCAD versions 2015 through 2018, both 32 and 64 bit.

You can download this latest version from the downloads page:

http://renderplus.com/wp2/download/?product=nXtRender%20for%20AutoCAD

Thanks Rich! Up and running...

RSS

Search

Translate

Latest Activity

Rich Hart replied to Paul Jackson's discussion Bricscad
"Unfortunately, we don't have a version that works with BricsCAD now, and that older trial version cannot be reinstated."
Jun 19
Alfons Akamp replied to Paul Jackson's discussion Bricscad
"Ich habe hier auch eine nxtrender Version für Bricscad 15. Die sieht anders aus, als die von Acad. Leider ist auch bei mir der Testzeitraum schon lange abgelaufen. Gibt es die Möglichkeit mir eine Testlizenz dafür zuzuschicken??…"
Jun 19
George Ioannidis commented on Chris Fox's photo
Thumbnail

Bedroom

"Another good rendering. Those two photoshopped reading lights are not looking good though. They don't follow the perspective, the left one is higher than the right one. Also, they are supposed to be turned on (judging from the light on wall…"
Jun 15
George Ioannidis commented on Chris Fox's photo
Thumbnail

Single Family Home

"Great image as always. I would just blur the tree shadow on the lawn to match soft shadows on the building. Nice blending of cut-out greenery. Excellent job."
Jun 15
George Ioannidis commented on Chris Fox's photo
Thumbnail

Railroad kitchen

"Very nice rendering Chris! The only thing that distracts me is the fruit bowl. It's too evidently pasted in PS.  Another thing (nothing to do with rendering) is the microwave above the stove. I would rather expect a cooker hood there."
Jun 15
akinlolu olugboji posted a discussion

trim and extension command

On AutoCad 2021.The trim and extension command works funny. I initiate the command then click the cutting edge (press entre) then click the lines I need to trim or extend.Now I initiate the command and as soon as I click the object selected trims or extend.  How can I correct this, it is really affecting my work?See More
Jun 14
Chris Fox posted photos
Jun 12
ebenezer attah koomson posted photos
Jun 3

© 2020   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service