AccuRender nXt

advanced rendering for AutoCAD

Hi there,

 

I am using Nxt for some time but never made panorama's

Is there somewhere a Howto to make panorama's

 

I know that it is in the walkabout section but I have to make a camerapath.

I think a panorama does not need a path but only a certain amount of degrees to see.

 

Who cab help me out?

Views: 478

Reply to This

Replies to This Discussion

Marko the panorama will generate a 360 degrees image. You will  need a panoviewer (panp2qtvr is a good one and is free) to load the jpg image and transform in a qtvr image. Take a look at Miguel Tano Adames images, he use to work on panorama files.

 

I hope this help.

 

Alejandro

Alejandro,

I figured out that FSPViewer64 shows the image right away.

So no transformation is nessecary.

There is only a resolution matter.
In the main walkabout window there is a resolution option and in the next window (setup) also.

The resolution in the setup window is not taken but only the width in de walkabout window.
When I put there 4000 f.i. the render resolution is 4000x2000 and not 4000x3000 as i put it in de setup window.

 

What about the camera en target paths;

Only a camera path will not work

Can I use points for both paths?

Panoramas are only available in WalkAbout and therefore only use the WalkAbout resolution.  The aspect ratios for panoramas is always 2:1.  You specify the width in pixels.  The center of the panorama is your current viewpoint.  The starting direction is defined by your current view direction, although any up or down angle on the view is ignored (panoramas are never tilted up or down.)  Panoramas always cover the entire sphere.

 

Camera and target paths are not necessary for panoramas (they may not even work for doing multiple panos, I can't quite remember.)

 

There used to be a facility for linking panoramas together, jumping from one point of view to another.

Is this something that can be added back in?

It's not something I'm going to do, no.  There are a bunch of pano editors out there that allow you to add links.  Some of these may even be free.

Hi Marko, you actually just have to set the tipe of projection in the main walkbout window (perspective, two-points-perspective and PANORAMA). There's no need to set up any animation for that, nor camera path or view path. The the resolution depends very much on the use of the result image: i.e. I generally use 4000 pixel, which means 4000x2000 pixel rectangular projection image, good for almost every porpouse. FSPViewer64 is definitely good and very light, but if you want to create a walkabout paths into several panoramas, then I seggest panp2qtvr as Alejandro suggested (it creates various .mov files wich can be linked with hotspots, etc.). Consider that nXt panoramas are point-of-view ones, as the "observer" was standing in a point and looks all around. Have a look here if you want: http://www.accurender.com/photo/albums/panoramas

RSS

Search

Translate

Latest Activity

Maciej posted photos
Thursday
N` Goraw posted photos
Nov 21
Roy Hirshkowitz replied to LUIS CONTI's discussion AccurenderNXT for AutoCAD - urgent help please
"Hello Luis - per our email exchange in June, we're available to help with some training. I'll email you separately to schedule an online call."
Nov 19
OYEBANJI EMMANUEL replied to LUIS CONTI's discussion AccurenderNXT for AutoCAD - urgent help please
"You can mail me at ebanj88@gmail.com or whatsapp me on this line +2348164691476"
Nov 18
OYEBANJI EMMANUEL replied to LUIS CONTI's discussion AccurenderNXT for AutoCAD - urgent help please
"Hi LUIS CONTI, Welcome to the accurender forum. I can be of assistance to you to help solve your problems with accurender nxt for autocad for a token. I can teach you interior, exterior and walkthrough animation as i have done all these in the…"
Nov 18
LUIS CONTI posted a discussion

AccurenderNXT for AutoCAD - urgent help please

Hi everyone,I'm from Sydney Australia I worked for a company that use to operate Accurender NXT for AutoCAD. Unfortunately, the fella that use to know how to use it has retired.I only have just started to use the program now, but am struggling to understand how to best use it. I cannot get help from my fellow retire college as he has moved overseas and as he put it " wants to switch off " . Are there any users here from sydney australia, that could help me out with team viewer or zoom tutorial,…See More
Nov 17
cesar eduardo martinez torres posted photos
Nov 4
OYEBANJI EMMANUEL replied to Roy Hirshkowitz's discussion Cloud Rendering
"I am interested in you adding a render farm service but please bring the price down by 70% especially for those of us who need to render walkthrough animations. Thank you Sir."
Sep 20

© 2024   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service