Reinstall ARnXt 64_0329 - AccuRender nXt2024-03-28T15:44:28Zhttps://accurender.ning.com/forum/topics/reinstall-arnxt-64-0329?commentId=6293855%3AComment%3A128151&x=1&feed=yes&xn_auth=noRich, thanks for your help.tag:accurender.ning.com,2017-08-09:6293855:Comment:1281512017-08-09T19:13:45.481ZDecio Baptistuccihttps://accurender.ning.com/profile/DecioBaptistucci
<p>Rich, thanks for your help.</p>
<p>Rich, thanks for your help.</p> Try these instructions, using…tag:accurender.ning.com,2017-08-09:6293855:Comment:1283472017-08-09T18:48:22.500ZRich Harthttps://accurender.ning.com/profile/RichHart
<p>Try these instructions, using _appload to load the “<strong>_19</strong>” arx for <strong>AutoCAD 2013</strong>:</p>
<p>Normally nXtRender registers its commands with AutoCAD during installation. On occasion, this mechanism may fail. In this case you will need to manually load nXt the first time you run it in a particular version of AutoCAD. Use the following procedure:</p>
<p>1. Type <i>_<b>appload</b></i> at the command line.</p>
<p>2. Navigate to the folder where nXt was…</p>
<p>Try these instructions, using _appload to load the “<strong>_19</strong>” arx for <strong>AutoCAD 2013</strong>:</p>
<p>Normally nXtRender registers its commands with AutoCAD during installation. On occasion, this mechanism may fail. In this case you will need to manually load nXt the first time you run it in a particular version of AutoCAD. Use the following procedure:</p>
<p>1. Type <i>_<b>appload</b></i> at the command line.</p>
<p>2. Navigate to the folder where nXt was installed. This is normally <i>C:\Program Files\AccuRender nXt</i></p>
<p>3. Select one of the following files depending on your platform:</p>
<p> </p>
<p>· <b>AccuRender nXt.arx</b> -OR- <b>AccuRender nXt64.arx</b> (AutoCAD 2007 – 2009)</p>
<p>· <b>AccuRender nXt_18_.arx</b> -OR- <b>AccuRender nXt_18_64.arx</b> (AutoCAD 2010 – 2012)</p>
<p>· <b>AccuRender nXt_19_.arx</b> -OR- <b>AccuRender nXt_19_64.arx</b> (AutoCAD 2013 – 2014)</p>
<p>· <b>AccuRender nXt_20_.arx</b> -OR- <b>AccuRender nXt_20_64.arx</b> (AutoCAD 2015- 2016)</p>
<p>· <b>AccuRender nXt_21_.arx -OR- AccuRender nXt_21_64.arx</b> (AutoCAD 2017)</p>
<p>· <b>AccuRender nXt_22_.arx -OR- AccuRender nXt_22_64.arx</b> (AutoCAD 2018)</p>
<p> </p>
<p>4. Press <b><i>Load</i></b></p>
<p> </p>
<p>Check the AutoCAD command line to verify that the application loaded without error. At this point you should be able to type <i>nxt</i> or <i>ar5</i> to launch the application. You should not have to repeat this procedure again for this version of AutoCAD. Simply typing <i>nxt</i> or <i>ar5</i> at the command prompt should cause nxt to load. You may need to repeat this procedure if you install another version of AutoCAD.</p>
<p> </p>
<p>It’s also possible that you downloaded the wrong install file, like the 32 bit version when you needed the 64 bit install file.. If you are on a 64 bit machine, make sure that you are running one of the ARX modules that contains _64” in the name.</p>
<p></p>