AccuRender nXt

advanced rendering for AutoCAD

Roy, All...

Upgraded to new computer and software...Win 10, ACAD Architect 2017, nXt 1.0.358...

Working on new rendering/dwg file, starting with one done last year. Previously working imported 3DS objects (people) are weirding out...putting materials in the wrong locations (see attached.)

Thought I'd start from scratch...new file. ACAD...nXT...add textured mesh object...select...select location...pick...crash (see attached for ACAD error message).

Next...copied the previously used 3DS people to a new ACAD drawing...materials in wrong locations (see attached dwg and image).

TLDR - New hardware and software...textured meshes used to work and now don't.

Ideas?

Thanks,

John

Views: 146

Attachments:

Reply to This

Replies to This Discussion

I'll see if I can track these problems down.

Thanks Rich...Let us know.

I posted a new version where Importing 3DS files is working again, and your sampel drawing People.dwg is rendering correctly in the latest versions of AutoCAD.

I tested this in in AutoCAD versions 2015 through 2018, 64 and 32 bit.

http://renderplus.com/wp2/download/?product=nXtRender%20for%20AutoCAD

Don't know how you do it....but you did it! It works...

Thanks Rich!

John

Great! Let us know if you find anythng else that needs attention.

RSS

Search

Translate

Latest Activity

Brittany Watson replied to Brittany Watson's discussion Groundcover Issues
"Hi Ben, You were absolutely right! I took over a computer that was previously used for rendering by someone else. The Accurender Plant Editor was on the desktop and used as the primary plant editor, so I assumed it was the only one. Thank you so…"
May 18
Ben Mixson replied to Brittany Watson's discussion Groundcover Issues
"Hi Brittany, I have two different plant editors. The Accurender plant editor that installed with Accurender Studio and the NXT plant editor that installed with NXT for Autocad. Only the NXT for Autocad version lets you open, modify, and save…"
May 14
Brittany Watson posted a discussion

Groundcover Issues

Hello,I am hoping to get some clarity on how to modify and add groundcover. I have searched everywhere on the forum and online to find how to save a plant as .ArGroundcover, but I cannot find anything. I am using AccuRender Plant Editor and once I finish editing the plant that I want to use as a groundcover, I click "save plant as", but all it allows me to save as is .ArTree. I have a deadline to get this render finished, but I cannot for the life of me figure this out. See More
May 14
Roy Hirshkowitz replied to Roy Hirshkowitz's discussion AccuRender Studio
"Thanks, I'll check on the first two.  The third is normal behavior-- data conversion stops when the arstudio data is detected.  There is a command to remove the arstudio data which would allow you to start from scratch-- probably not…"
Apr 19
Peter Milner replied to Roy Hirshkowitz's discussion AccuRender Studio
"Two things don't seem to translate from nXt: Procedural bump and orientation of texture in a material.   Also, if a decal is changed using nXt, Studio continues to display the original decal. Editing the decal in the Studio material pallet…"
Apr 19
Peter Milner replied to Roy Hirshkowitz's discussion AccuRender Studio
"That sorted it - using the Studio camera and then selecting "Get AutoCAD view"."
Apr 19
Roy Hirshkowitz replied to Roy Hirshkowitz's discussion AccuRender Studio
"Interesting.  ArStudio has its own WalkAbout-like feture, it's the little camera button.  If you do it while the preview is running you should see the view changes automatically in the rendering."
Apr 19
Peter Milner replied to Roy Hirshkowitz's discussion AccuRender Studio
"I'm having trouble getting the desired view in Studio. I've tried setting the view in nXt walkabout and then using that to set the AutoCAD view. However, when I render from Studio, it gives me something different (see images below)."
Apr 19

© 2021   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service