AccuRender nXt

advanced rendering for AutoCAD

Jorge Javier Lara Domínguez's Discussions (288)

Discussions Replied To (248) Replies Latest Activity

"Gracias Roy. Tus comentarios y tiprs siempre son muy buenos. Saludos"

Jorge Javier Lara Domínguez replied Mar 3, 2011 to Bajar versiones experimentales?

2 Mar 3, 2011
Reply by Jorge Javier Lara Domínguez

"Alex... Consultandote: en Ar4 las luces venian cargadas con caracteristicas propias,…"

Jorge Javier Lara Domínguez replied Jan 22, 2011 to Cuanto tiempo es el prudente para un buen resultado de calidad de imagen en nxt?

13 Jan 22, 2011
Reply by Alejandro Testa

"en Ar4 tenia preestablecidos el tipo de luces (ventanas, spot, etc...) en nxt como p…"

Jorge Javier Lara Domínguez replied Jan 21, 2011 to Cuanto tiempo es el prudente para un buen resultado de calidad de imagen en nxt?

13 Jan 22, 2011
Reply by Alejandro Testa

"no use radiosity, emplee luces auxiliares. simulando el flash de una camara y el ref…"

Jorge Javier Lara Domínguez replied Jan 21, 2011 to Cuanto tiempo es el prudente para un buen resultado de calidad de imagen en nxt?

13 Jan 22, 2011
Reply by Alejandro Testa

"Esta imagen la hice con Ar4...."

Jorge Javier Lara Domínguez replied Jan 21, 2011 to Cuanto tiempo es el prudente para un buen resultado de calidad de imagen en nxt?

13 Jan 22, 2011
Reply by Alejandro Testa

"Esta imagen la renderice 70 minutos  "

Jorge Javier Lara Domínguez replied Jan 21, 2011 to Cuanto tiempo es el prudente para un buen resultado de calidad de imagen en nxt?

13 Jan 22, 2011
Reply by Alejandro Testa

""

Jorge Javier Lara Domínguez replied Jan 21, 2011 to Cuanto tiempo es el prudente para un buen resultado de calidad de imagen en nxt?

13 Jan 22, 2011
Reply by Alejandro Testa

"Que tal Alejandro: Seria muy interesante participar en un grupo de trabajo como el q…"

Jorge Javier Lara Domínguez replied Jan 18, 2011 to Para los usuarios de NXT en español y/o portugués

54 Jan 19, 2011
Reply by Alejandro Testa

RSS

Search

Translate

Latest Activity

Rich Hart replied to Brittany Watson's discussion Continuous Recessed Lighting Issues
"I see that if I turn the soffit layer off, that those can lights on the right are working. So I assume the soffit is blocking the light. Unfortunately, I'm not able to try moving the can lights down for some reason. I can try looking into this…"
12 hours ago
Brittany Watson replied to Brittany Watson's discussion Continuous Recessed Lighting Issues
"I apologize, they are the smaller can lights on right soffit side of the arched ceiling, the bigger ones on the opposite side (left) are working correctly. They do work when the light source is pulled out of the can object or out of the soffit, so…"
15 hours ago
Rich Hart replied to Brittany Watson's discussion Continuous Recessed Lighting Issues
"Unfortunately, the model was still just too large for my machine. After about 15 minutes I had to turn off the computer so that I could do something else while it was rendering.. Could you give me any idea of where the lights are that don't…"
15 hours ago
Brittany Watson replied to Brittany Watson's discussion Continuous Recessed Lighting Issues
"Just sent. Thank you for the quick response!"
19 hours ago
Rich Hart replied to Brittany Watson's discussion Continuous Recessed Lighting Issues
"Can you send us a model where this is happening, to see if we can duplicate it here? As small a model as possible would be appreciated. You can use this link to send it to us: https://renderplus.com/wp2/uploads/ Thanks, Rich"
yesterday
Brittany Watson posted a discussion

Continuous Recessed Lighting Issues

Hi I use AutoCAD Architecture and have been having on going problems with a recessed can light block. I have completed 3 renderings now in which I have had to spend days trying to get my recessed lighting to work. Other lights work, and occasionally some of the can recessed lights will show up. I have exploded the block and added them individually, I have aimed the light and rotated it every which way, but most of the time nothing works.  I have tested out the problem on my current rendering…See More
yesterday
Roy Hirshkowitz replied to Peter Milner's discussion Accurender Studio cloud rendering
"I pulled the option to use my Azure Batch cloud out of the current product.  There wasn't much interest in it.  You can set up your own Azure account with Microsoft and use it, it's not trivial but also not too hard.  I…"
Feb 21
Peter Milner posted a discussion

Accurender Studio cloud rendering

How much does it cost to use cloud rendering?See More
Feb 21

© 2020   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service