Peter Milner's Discussions

Discussions Replied To (710)	Replies	Latest Activity
"Okay. I removed all the reflective properties from most of the materials. As you can…" Peter Milner replied Aug 19, 2011 to Depth of colour	16	Aug 19, 2011 Reply by Ros. Riha
"Here's some screen shots supplied by our graphic designer which show what is going o…" Peter Milner replied Aug 18, 2011 to Depth of colour	16	Aug 19, 2011 Reply by Ros. Riha
"I've tested this theory and the images I use for textures have full colour depth (ma…" Peter Milner replied Aug 17, 2011 to Depth of colour	16	Aug 19, 2011 Reply by Ros. Riha
"Yes. My model sizes were between 16 and 35Mb. Four small renderings achieved around…" Peter Milner replied Aug 17, 2011 to Multiple Sessions	9	Aug 17, 2011 Reply by Peter Milner
"I've been running 5 renderings consecutively for the past 2 weeks while I've been on…" Peter Milner replied Aug 17, 2011 to Multiple Sessions	9	Aug 17, 2011 Reply by Peter Milner
"We've tried the equalize thingy, but it just sets all the levels at an equal low. Th…" Peter Milner replied Aug 4, 2011 to Depth of colour	16	Aug 19, 2011 Reply by Ros. Riha
"Thanks Roy. I tried the HDR option, but that gives me an image with huge lighting co…" Peter Milner replied Aug 4, 2011 to Depth of colour	16	Aug 19, 2011 Reply by Ros. Riha
"If you're using Path Tracer, you'll need to run many more passes for it to smooth ou…" Peter Milner replied Jul 18, 2011 to Night Simmulation	3	Jul 19, 2011 Reply by akinlolu olugboji
"A lot of the restrictions are to do with AutoCAD rather than Accurender. However, Au…" Peter Milner replied Jul 18, 2011 to MATERIAL MAPPING	18	Jul 18, 2011 Reply by John Ferris
"By using planar mapping the material is mapped flat between the point (1-2 = X, 1-3…" Peter Milner replied Jul 18, 2011 to MATERIAL MAPPING	18	Jul 18, 2011 Reply by John Ferris

Discussions Replied To (710)

Replies

Latest Activity

"Okay. I removed all the reflective properties from most of the materials. As you can…"

Peter Milner replied Aug 19, 2011 to Depth of colour

Aug 19, 2011
Reply by Ros. Riha

"Here's some screen shots supplied by our graphic designer which show what is going o…"

Peter Milner replied Aug 18, 2011 to Depth of colour

Aug 19, 2011
Reply by Ros. Riha

"I've tested this theory and the images I use for textures have full colour depth (ma…"

Peter Milner replied Aug 17, 2011 to Depth of colour

Aug 19, 2011
Reply by Ros. Riha

"Yes. My model sizes were between 16 and 35Mb. Four small renderings achieved around…"

Peter Milner replied Aug 17, 2011 to Multiple Sessions

Aug 17, 2011
Reply by Peter Milner

"I've been running 5 renderings consecutively for the past 2 weeks while I've been on…"

Peter Milner replied Aug 17, 2011 to Multiple Sessions

Aug 17, 2011
Reply by Peter Milner

"We've tried the equalize thingy, but it just sets all the levels at an equal low. Th…"

Peter Milner replied Aug 4, 2011 to Depth of colour

Aug 19, 2011
Reply by Ros. Riha

"Thanks Roy. I tried the HDR option, but that gives me an image with huge lighting co…"

Peter Milner replied Aug 4, 2011 to Depth of colour

Aug 19, 2011
Reply by Ros. Riha

"If you're using Path Tracer, you'll need to run many more passes for it to smooth ou…"

Peter Milner replied Jul 18, 2011 to Night Simmulation

Jul 19, 2011
Reply by akinlolu olugboji

"A lot of the restrictions are to do with AutoCAD rather than Accurender. However, Au…"

Peter Milner replied Jul 18, 2011 to MATERIAL MAPPING

Jul 18, 2011
Reply by John Ferris

"By using planar mapping the material is mapped flat between the point (1-2 = X, 1-3…"

Peter Milner replied Jul 18, 2011 to MATERIAL MAPPING

Jul 18, 2011
Reply by John Ferris

OYEBANJI EMMANUEL posted a discussion

RENDER FARMER SOFTWARE

Good day Roy,Please i need a link to the render farm software for nxtrender for autocad.Thanks.See More

Jul 30

0 Comments

Roy Hirshkowitz replied to John Ferris's discussion AutoCad 2026

"For compatibility with AutoCAD 2026 you would need to purchase a license upgrade for nXtRender (AccuRender). As an AR5 license holder you are eligible for a discount which we can give to you if you contact us at support@renderplus.com."

May 20

John Ferris posted a discussion

AutoCad 2026

Roy/ All,Currently use AR5 with AutoCad Architecture 2017. Have, and typically use ACAD 2022, but AR5 doesn't load, so I revert back to 2017 when it's time to use AR5).Long time user...had to create new profile due to Architecture firm closing (boss retired). Am now with GC firm and have been using old computer from Arch firm (Boxx Apexx 2) with above mentioned software. Been working fine. Just got new new computer, and am updating software.Downloaded AutoCad Architecture 2026. Where can I get…See More

Apr 23

1 Comment

Orbe3D commented on OYEBANJI EMMANUEL's photo

interior 1x1_2015-2024-08-26-16-55-09x

"Beautiful. You can also check our 3d modeling"

Apr 9

Orbe3D commented on OYEBANJI EMMANUEL's photo

V6x copy

"Beautiful"

Apr 9

Roy Hirshkowitz replied to Maciej's discussion nXt + AutoCAD 2025

"Resolved via email (support@renderplus.com)"

Feb 20

Maciej posted a discussion

nXt + AutoCAD 2025

Gentlemen,The last file I used to load, was ArAcad_24_64.arx, and, unfortunately, it doesn't work with Acad 2025.Any idea how to get the proper nXt-App which suits Acad 2025?Any help appreciated...Regards, Maciej MarkowskiSee More

Feb 17

1 Comment

OYEBANJI EMMANUEL replied to OYEBANJI EMMANUEL's discussion CAN WE GET PETER MILNER TO TRAIN SOME OF US FOR A TOKEN ?

"I meant Chris Fox, not David."

Feb 13

Peter Milner's Discussions (826)

"Okay. I removed all the reflective properties from most of the materials. As you can…"

"Here's some screen shots supplied by our graphic designer which show what is going o…"

"I've tested this theory and the images I use for textures have full colour depth (ma…"

"Yes. My model sizes were between 16 and 35Mb. Four small renderings achieved around…"

"I've been running 5 renderings consecutively for the past 2 weeks while I've been on…"

"We've tried the equalize thingy, but it just sets all the levels at an equal low. Th…"

"Thanks Roy. I tried the HDR option, but that gives me an image with huge lighting co…"

"If you're using Path Tracer, you'll need to run many more passes for it to smooth ou…"

"A lot of the restrictions are to do with AutoCAD rather than Accurender. However, Au…"

"By using planar mapping the material is mapped flat between the point (1-2 = X, 1-3…"

Search

Translate

Latest Activity

RENDER FARMER SOFTWARE

AutoCad 2026

interior 1x1_2015-2024-08-26-16-55-09x

V6x copy

nXt + AutoCAD 2025