AccuRender nXt

advanced rendering for AutoCAD

I have 4 views that I use in my AutoCAD.

Can I send this to the farm and have it render all 4 views in a "batch"?

I have been converting the ,JPG output of the 4 .JPG files to 4 separate PDF files and then my drawing imports them as a PDF underlay..

Views: 52

Reply to This

Replies to This Discussion

The Batch processor in WalkAbout has a Farm Button.  I haven't tried it in a while, but that's what it's for.  Let me know if you need more specifics.

***

OT-- when you get a chance give AccuRender Studio a try and let me know what you think.  There are plugins for AutoCAD 2013 and up, plus Rhino 6.  See the previous topic for more info.

Super.....Thanks Roy...

I will try the AccuRender Studio too....

RSS

Search

Translate

Latest Activity

Roy Hirshkowitz replied to Marko Stout's discussion renderfarm
"Yes."
Wednesday
Marc Chaumier posted photos
Wednesday
Marc Chaumier replied to Marko Stout's discussion renderfarm
"...but the 64 bits release is still working?"
Wednesday
norton torres replied to norton torres's discussion accurender version 1.0.354
"ok... the RPS_nXtRender_R22_x64 sudenly is there... magic..!! thanks HART.... I JUST DOMLOAD AGAIN AND REBOOT..."
Monday
norton torres replied to norton torres's discussion accurender version 1.0.354
"NO 22 ..."
Monday
Rich Hart replied to norton torres's discussion accurender version 1.0.354
"Normally, nXtRender registers its commands with AutoCAD during installation. On occasion, this mechanism may fail. In this case you will need to manually load nXt the first time you run it in a particular version of AutoCAD.   Use the…"
Monday
norton torres replied to norton torres's discussion accurender version 1.0.354
Monday
norton torres posted a discussion

accurender version 1.0.354

why I cant use accurender version 1.0.354 in autocad 2018See More
Monday

© 2019   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service