corten_pavillon_22mm_1
"Thanks for your kind words.
Yes, all plants are generated with nxt plant-editor.
I have used leaves from Marc Chaumier's plant library.
(Download/ Content + Entourage)"
advanced rendering for AutoCAD
Instability
Hi, roy, I notice an instability with the last update. On several dwg, the render stop at the first pass and the same number, for example: pass1 (2320); and when sometime it go farther, to the 4 or 43 pass, ist stop at the same number (2320 for this example). NXT is freezing, I can come back to autocad to save, but when I try to stop nxt, I have to make them crash (close the window) to go out. And I noticed problem in reflection as I show you in the picture. When I go back to the "249", everything is ok... and faster.
Views: 112
Replies to This Discussion
-
Permalink Reply by Roy Hirshkowitz on
-
I'm not quite sure I understand. If you have a drawing that's crashing with any consistency I'm definitely interested.
The reflection, particularly with glossy objects, is quite a bit different now. Per pass times might be faster with 249 but convergence should be a lot faster with the current version.
-
Permalink Reply by Marc Chaumier on
-
NXT is freezing, it stops, at the first pass often, when I remove some plants or objects, sometime it goes after the first, but it stops, and it seems, always at the same moment of the render pass. That happen on several drawings. And every drawing has his own point where it freeze. I don't know if it's nXt or my hard-soft-ware. But with the 249, everything is ok, no freeze.
About the problem with reflection: on the pictures I send, the "261" is after 43 passes (and crash) and the "249" after 4 passes (around).
-
-
The current version is 263-- you might try it. I need to reproduce the problem here in order to do anything about it. Currently I'm not experiencing the problem you're describing with any of my test models. I'm happy to try to reproduce the problem here if you want to try. You'll need to upload the drawing with instructions.
-
-
Oh yes! Exact, I wanted to say 263. The reflection issue is visible on the feet of the table. I make some trial and I come back.
-
-
I know about the reflection "issue"-- it's a change in behavior. If you increase the sharpness of the material you should get closer to your first picture. The only issue I'm interested in right now is the hanging or crashing.
Search
Translate
Latest Activity
corten_pavillon_22mm_1
"Very nice piece. Brilliant work.
Are all these plants nxt render plants ?
They look very good. Ground cover is so thoughtful."
"Thank you so much."
"Sorry, do not exactly how to do it right.
If i sent you one or sets, could you "compose" one material as an example?
Maybe this is interesting for others too.."
"Thanks Rich,
exacvtly what i found out.
Only did't know what to dfo with the AO map.."
"nXtRender doesn't use the AO texture image settings for anything, so don't bother trying to use that.
I would start use the Diffuse textures at 100% and experiment with the levels of the Specular Reflection.
You might need to toggle the…"
"Hi,i imported some old Dosch 3D plants in nxtRender for testing, fully textured without an issue.
Also used some free sketchup tree models (*.skp) from sketchuptextureclub and opened them in sketchup, exportet them to *.obj and used them in…"
© 2026 Header image courtesy Peter Milner
Powered by
