Material Thumbnails

[James Milford]

Hello All,

Installed newest NXTrender 64-bit on two new identical windows 7 64-bit machines with Autocad Architecture 2011 64-bit.

The armaterial thumbnails show up on one machine but not the other. I've tried registering the .dll as discussed in previous forum topics, but that does not work. Have also uninstalled and re-installed on the machine to no avail. Any other ideas?

Thanks

James

[Roy Hirshkowitz]

Which .dll did you try registering and what was the result?  You can run regsvr32 as many times as you want without hurting anything.  Make sure you logoff/on after you resgister it.

[James Milford]

I tried to register the ArMatThumb.dll first, also tried ArMatThumb64.dll.

I had at first tried running the reg.thumb.bat which came up with the error "The module "ArMatThumb64.dll" was loaded but the call to DllRegisterServer failed with error code 0x80070005".

After that was when I ran the regsvr32 command in administrator mode. again using both .dll's mentioned above. Message that came up was "The module armatthumb.dll failed to load. Make sure the binary is stored at the specified path or debug it to check for problems with the binary or dependent .DLL files. The specified module could not be found"

Have also logged off/on since.

[Roy Hirshkowitz]

Try one more time just to make sure-- I think you're on the right track. The file you need to register is armatthumb64.dll-- don't bother with the other one.  It must be run from an elevated command prompt.

Try the following:

1. Make sure you're logged in as an Administrator.
2. In the start menu All Programs->Accessories right click in the command prompt and select Properties.
3. Select Advanced and check the box marked Run as Administrator.
4. Run the program-- you should get an Admin Command Prompt window.
5. Navigate to the accurender folder-- usually cd "c:\program files\accurender nxt"
6. Run regsvr32 on armatthumb64.dll.

Let me know if you get any error messages.

[akinlolu olugboji]

I seems to have the same issues for AutoCad 2007 on a Win 8.1 64bits machine. Which way to go.

[akinlolu olugboji]

got this error thumbnails show in AutoCad 2016 64 bit but not on AutoCad 2007 on the same machine.

[James Milford]

Great that worked! Thank you very much.

[cadzia]

I got the same problem -> now (with this) it works again - thank you very much !!! :-)