AccuRender nXt

advanced rendering for AutoCAD

Quick question

Hi guys,
I got one quick question about render that I'm working on currently. I got house which is lighted by sun + studio brightness. How can I make this wall in shadow brighter without adding another light? Any other suggestions or advices how to improve or make it more realistic requested. 
Thank you in advance,
rav.

Views: 830

Attachments:

▶ Reply to This

Replies to This Discussion

Permalink Reply by Rav on November 23, 2014 at 9:39am

Thank you for responding
I've tried it and the result was just like on this first photo i uploaded :/ Despite sun 2.0 walls in shadow were dark.

Permalink Reply by Chris Fox on November 23, 2014 at 12:29pm

You need to also raise the cloudiness to .5 and raise the ambient to high... if you could send me the model I can manually set the sun the settings. I also have a few good wood plans.... see attached...

Attachments:
Permalink Reply by Rav on November 23, 2014 at 1:43pm

Thank you very much, you are very helpful. I've changed wood texture, looks way better. Here is my model.
Thank you once again, I appreciate it.

Permalink Reply by Rav on November 23, 2014 at 1:59pm
Permalink Reply by akinlolu olugboji on November 24, 2014 at 12:18pm

Attempt to download your model spits out the following error.

Permalink Reply by Chris Fox on November 23, 2014 at 12:31pm

Sometimes with lighting you have to play with the settings.. what might work in one case will not work as well in another... depends on the geometry of the Architecture, the glossiness, reflectivity and transparency of the materials

RSS

Search

Translate

Latest Activity

Thorsten Hedrich posted a discussion

OBJ Plant Issue - Diffuse Maps

Hi to anyone;maybe a similar issue as Mr.Holz announced recently, (PBR Texture question):-added a obj. plant via 'Textured Mesh Objects' widget-reassigned maps (materials showed up, but with no maps attached, (although mtl. files are  in the same folder as corresponding maps and obj files)-tried to render (see 'result')So my question is: Does anybody knew about how to handle Diffuse Maps in nXt, i suspect there is no interpretation of the UV-Coordinates?Any hints and help kindly appreciated!…See More
Friday
0 Comments
Thorsten Hedrich commented on Thorsten Hedrich's photo
Thumbnail

corten_pavillon_22mm_1

"Thanks for your kind words. Yes, all plants are generated with nxt plant-editor. I have used leaves from Marc Chaumier's plant library. (Download/ Content + Entourage)"
Feb 1
OYEBANJI EMMANUEL commented on Thorsten Hedrich's photo
Thumbnail

corten_pavillon_22mm_1

"Very nice piece. Brilliant work.  Are all these plants nxt render plants ? They look very good. Ground cover is so thoughtful."
Jan 31
Thorsten Hedrich posted photos
Thumbnail
Thumbnail
Jan 28
OYEBANJI EMMANUEL replied to OYEBANJI EMMANUEL's discussion Questions for nxt render for autocad
"Thank you so much."
Jan 22
Daniel Holz replied to Daniel Holz's discussion PBR Textures in nxtRender for Autocad
"Sorry, do not exactly how to do it right. If i sent you one or  sets, could you "compose" one material as an example? Maybe this is interesting for others too.."
Jan 2
Daniel Holz replied to Daniel Holz's discussion PBR Textures in nxtRender for Autocad
"Thanks Rich, exacvtly what i found out. Only did't know what to dfo with the AO map.."
Dec 31, 2025
Rich Hart replied to Daniel Holz's discussion PBR Textures in nxtRender for Autocad
"nXtRender doesn't use the AO texture image settings for anything, so don't bother trying to use that. I would start use the Diffuse textures at 100% and experiment with the levels of the Specular Reflection. You might need to toggle the…"
Dec 30, 2025

© 2026   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service