corten_pavillon_22mm_1
"Thanks for your kind words.
Yes, all plants are generated with nxt plant-editor.
I have used leaves from Marc Chaumier's plant library.
(Download/ Content + Entourage)"
advanced rendering for AutoCAD
AR3/AR4 plant files
how can I download old AR3 and AR4 files *Arplant.
I bought full version just now. Still looking for stunning
plants and bushes of old version.
Please anyone send me the link or downloadable files on my registered email.
Views: 470
- Attachments:
-
-
Meeraj 02.jpg, 884 KB
-
Replies to This Discussion
-
Permalink Reply by Kevin Lockwood on
-
Some of the old plants still work well, but many don't. I had a large selection of palms. nXt does not apply the correct trunk radius, so California Fan palms that used to render with a 3' diameter trunk now render with a 8"+/- trunk. editing the "diameter" with nXts edit tool only makes the tree taller.
This is typical with all of my palms. I've actually moved to using textured mesh obj or 3ds files when it calls for close ups or more detail. That attached image show a Cal Fan Palm that used ro have a trunk nearly the same width as the skirt.
The leaf mapping is off too.
Bushes and flowers seem to still render as expected. Haven't tested groundcover, but I assume those are fine too.
-
Permalink Reply by Nutan Desai on
-
Still I did not get real reply to my question.. Please tell me How can I down load all plant files of old versions without having old versions on my computers. Do you know any direct link available ???
-
-
I'm doing a search on my PC. I think I still have the old exe's to install (3 seperate if I remember correct). If not at home, I have them at work. I'll look Monday.
in the meantime..
http://www.accustudio.com/exchange/plants/classic-plants
I don't know what in the zip other than an install exe, but I do know you will need to path the director to the mlib (material library) and plib (plant library) and you will need the textures if the installer does not supply them. I assume it does.
-
-
I have accusudio_plib7 on my NXT folder
does it has these old plants
please so me how to install plant library
-
-
a plib is from AR3/4 as nXt used individual plant files like materials are. If you have the plib then I assume you have the textures that go with it. I think the mlib has the materials for the plants. I think you should have both.
I have my plant libraries and material folders in one "Materials" folder and have nXt pathed to it (image below).
Check the little hammer and wrench in the upper right corner of the nXt toolbar. verify the paths are pointing to your folder(s).
Once you check that, you should be able to "add legacy plant" and navigate to your plib.
oh, and I did not have the installers for the plants2 library at home. 90% sure I still have them at work.
Search
Translate
Latest Activity
corten_pavillon_22mm_1
"Very nice piece. Brilliant work.
Are all these plants nxt render plants ?
They look very good. Ground cover is so thoughtful."
"Thank you so much."
"Sorry, do not exactly how to do it right.
If i sent you one or sets, could you "compose" one material as an example?
Maybe this is interesting for others too.."
"Thanks Rich,
exacvtly what i found out.
Only did't know what to dfo with the AO map.."
"nXtRender doesn't use the AO texture image settings for anything, so don't bother trying to use that.
I would start use the Diffuse textures at 100% and experiment with the levels of the Specular Reflection.
You might need to toggle the…"
"Hi,i imported some old Dosch 3D plants in nxtRender for testing, fully textured without an issue.
Also used some free sketchup tree models (*.skp) from sketchuptextureclub and opened them in sketchup, exportet them to *.obj and used them in…"
© 2026 Header image courtesy Peter Milner
Powered by
