AccuRender nXt

advanced rendering for AutoCAD

how can I download old AR3 and AR4 files  *Arplant.

I bought full version just now. Still looking for stunning

plants and bushes of old version.

Please anyone send me the link or downloadable files on my registered email.

Views: 161

Attachments:

Reply to This

Replies to This Discussion

Some of the old plants still work well, but many don't. I had a large selection of palms. nXt does not apply the correct trunk radius, so California Fan palms that used to render with a 3' diameter trunk now render with a 8"+/- trunk. editing the "diameter" with nXts edit tool only makes the tree taller.

This is typical with all of my palms. I've actually moved to using textured mesh obj or 3ds files when it calls for close ups or more detail. That attached image show a Cal Fan Palm that used ro have a trunk nearly the same width as the skirt. 

The leaf mapping is off too. 


Bushes and flowers seem to still render as expected. Haven't tested groundcover, but I assume those are fine too.

Still I did not get real reply to my question.. Please tell me How can I down load all plant files of old versions without having old versions on my computers. Do you know any direct link available ???

I'm doing a search on my PC. I think I still have the old exe's to install (3 seperate if I remember correct). If not at home, I have them at work. I'll look Monday. 

in the meantime..

http://www.accustudio.com/exchange/plants/classic-plants

I don't know what in the zip other than an install exe, but I do know you will need to path the director to the mlib (material library) and plib (plant library) and you will need the textures if the installer does not supply them. I assume it does.

I have accusudio_plib7 on my NXT folder

does it has these old plants

please so me how to install plant library

a plib is from AR3/4 as nXt used individual plant files like materials are. If you have the plib then I assume you have the textures that go with it. I think the mlib has the materials for the plants. I think you should have both.

I have my plant libraries and material folders in one "Materials" folder and have nXt pathed to it (image below). 

Check the little hammer and wrench in the upper right corner of the nXt toolbar. verify the paths are pointing to your folder(s).

Once you check that, you should be able to "add legacy plant" and navigate to your plib.

oh, and I did not have the installers for the plants2 library at home. 90% sure I still have them at work. 

RSS

Search

Translate

Latest Activity

Roy Hirshkowitz replied to Chad Kauffman's discussion Licensing Issues
"Send me a private msg with your info."
yesterday
Chad Kauffman posted a discussion

Licensing Issues

Upgrading a couple of machines and also switch a user profile. I need our current license code to update. Thanks,See More
Tuesday
Kevin Lockwood replied to MES's discussion Animation using WalkAbout in CAD.
"Its been years for me too.  I think Daniel spent some time getting CoMotion running again.  http://www.accustudio.com/marketplace/comotion As to stitching frames, the tool I used to use wasn't working last time I tried, but I did…"
Nov 15
Rich Rosemann replied to MES's discussion Animation using WalkAbout in CAD.
"Is CoMotion no longer being updated?"
Nov 11
Roy Hirshkowitz replied to MES's discussion Animation using WalkAbout in CAD.
"Sorry you're not getting a better response here-- our animation stuff is pretty rudimentary.  Hoping someone will still chime in though.  I haven't looked at this stuff for such a long time, my guess is that the software I used…"
Nov 8
MES posted a discussion

Animation using WalkAbout in CAD.

Hi,I want to create a "fly thru" or "walk thru" animation using Nxt in CAD 2015.  Anyone has experience with this and would like to share how to use it? Any important tips?Thank you!See More
Nov 7
Roy Hirshkowitz replied to Enrico Gheno's discussion Perspective between 3D model and background image on NXT autocad 2015
"There are a couple of ways to do this-- In nXt the WalkAbout window allows you to insert and manipulate background images and your viewpoint independently.  You can either allow nXt to composite the image for you, or save the thing with a…"
Nov 4
Enrico Gheno posted a discussion

Perspective between 3D model and background image on NXT autocad 2015

Hi, I would like to insert my 3D model on an image in background, obviously with the correct position, size and perspective lines.Is there a method to move the 3D model to adapt it at the image in background?At the moment i can only try to setting the position of my 3D model with the Autocad camera and launch the render to control if the position is correct, but it's impossible to find it. I must render my 3D model and put it in my image with Photoshop. Not a great result.Look down here, the…See More
Nov 3

© 2019   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service