AccuRender nXt

advanced rendering for AutoCAD

FREE TUTORIAL
Here are some simple steps to get the out of focus effect
1)Place your camera (35mm lens) 600-700mm from the desired object.
2)Set your view.
3)Render setting-Depth of field should be set between
0.550 -0.650
4)Set focal distance - 600 to 700 depending on how far you set your camera from the object.
5) Render

Views: 113

Comment

You need to be a member of AccuRender nXt to add comments!

Join AccuRender nXt

Comment by mike makki on June 7, 2013 at 9:27pm

@Ignacio Gastelum Moller if your drawing settings in meters, then your focal distance should be set to 0.7meter the other should be the same figures I quoted ...anyway try it.

Jorge Javier Lara Dominguez ..no Jorge I did it the old fashion way in nxt software panel....I have yet to try the image editor but I shall tested next.

Comment by Jorge Javier Lara Domínguez on June 7, 2013 at 11:49am

MIke, esta imagen la lograste con el editor de imagenes??

Search

Translate

Latest Activity

Brittany Watson replied to Brittany Watson's discussion Groundcover Issues
"Hi Ben, You were absolutely right! I took over a computer that was previously used for rendering by someone else. The Accurender Plant Editor was on the desktop and used as the primary plant editor, so I assumed it was the only one. Thank you so…"
May 18
Ben Mixson replied to Brittany Watson's discussion Groundcover Issues
"Hi Brittany, I have two different plant editors. The Accurender plant editor that installed with Accurender Studio and the NXT plant editor that installed with NXT for Autocad. Only the NXT for Autocad version lets you open, modify, and save…"
May 14
Brittany Watson posted a discussion

Groundcover Issues

Hello,I am hoping to get some clarity on how to modify and add groundcover. I have searched everywhere on the forum and online to find how to save a plant as .ArGroundcover, but I cannot find anything. I am using AccuRender Plant Editor and once I finish editing the plant that I want to use as a groundcover, I click "save plant as", but all it allows me to save as is .ArTree. I have a deadline to get this render finished, but I cannot for the life of me figure this out. See More
May 14
Roy Hirshkowitz replied to Roy Hirshkowitz's discussion AccuRender Studio
"Thanks, I'll check on the first two.  The third is normal behavior-- data conversion stops when the arstudio data is detected.  There is a command to remove the arstudio data which would allow you to start from scratch-- probably not…"
Apr 19
Peter Milner replied to Roy Hirshkowitz's discussion AccuRender Studio
"Two things don't seem to translate from nXt: Procedural bump and orientation of texture in a material.   Also, if a decal is changed using nXt, Studio continues to display the original decal. Editing the decal in the Studio material pallet…"
Apr 19
Peter Milner replied to Roy Hirshkowitz's discussion AccuRender Studio
"That sorted it - using the Studio camera and then selecting "Get AutoCAD view"."
Apr 19
Roy Hirshkowitz replied to Roy Hirshkowitz's discussion AccuRender Studio
"Interesting.  ArStudio has its own WalkAbout-like feture, it's the little camera button.  If you do it while the preview is running you should see the view changes automatically in the rendering."
Apr 19
Peter Milner replied to Roy Hirshkowitz's discussion AccuRender Studio
"I'm having trouble getting the desired view in Studio. I've tried setting the view in nXt walkabout and then using that to set the AutoCAD view. However, when I render from Studio, it gives me something different (see images below)."
Apr 19

© 2021   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service