AccuRender nXt

advanced rendering for AutoCAD

We're up to Build 0082.  This new major release of the AccuRender and nXt product line now includes a plugin that works entirely within AutoCAD just like previous versions. It's got a ton of new features and is available for free for a while.  Take a look and let me know what you think.

See the Download->AccuRender Studio menu items for more details.

Views: 2462

Reply to This

Replies to This Discussion

Happy New Year ,Roy.

Is nXtRender required to be installed on the system to run Accurender Studio?

Sounds dumb, I guess, but I want to separate the system running the nXtRender program from a system running Studio.

Rich Rosemann

Not required no-- but you won't get any legacy data if nxtrender is not running-- just AutoCAD data.  It will work fine, though.

There really isn't much contact between the two-- so you won't mess up anything by running them both.  I would recommend making copies of any production work you're doing since this is an early project, but the risks are quite small with the way I'm handling the new stuff (no custom objects, etc.)  I did include an ArRemoveData command to strip any AccuRender Studio data out of the drawing as a bit of paranoid safety measure.

Good morning Roy.

The reason I asked the question is that after installing the program and loading the correct netload for acad 13 and entering the command arStudio, a error window pops up noting that

"Perspective View is required".

Thinking (tightly) inside the box, I set the view as perspective and run the command again. No change of course, just grabbing at straws.

So, what am I missing?

Rich Rosemann

I get the same and have to change the AutoCAD view from parallel to perspective. Then it works.

Thanks for changing your view to perspective, Peter.

Now ArStudio runs on my system to.

Some times it needs a little external help.

Rich Rosemann

It needs a perspective view the first time it's run.  It will remember its last view after that.  Use the perspective command.

Here's a quick comparison between nXt and ArStudio.

These both ran for 40 minutes.

ArStudio isn't picking up the material textures when it renders, but they do show in the material editor.

Also the ceiling hidden lighting and spotlights don't seem to have translated.

Can I get a copy of this one?

I've just sent it to you via WeTransfer.

Got it-- thanks.

iggest problem is units aren't set-- for some reason. Changed ddunits to millimeters (this will also affect performance in big ways.)

I changed the glass to refractive and checked thin-- that doesn't have much affect.  And I manually added the rug material texture.  The back wall doesn't seem to have a texture on it.  Investigating more now.

This is after 3 minutes or so:

From what I can tell-- the rug texture is not assigned in nXt-- nor is the back concrete wall (I can't even find this material.)

RSS

Search

Translate

Latest Activity

Ben Mixson replied to Brittany Watson's discussion Groundcover Issues
"Hi Brittany, I have two different plant editors. The Accurender plant editor that installed with Accurender Studio and the NXT plant editor that installed with NXT for Autocad. Only the NXT for Autocad version lets you open, modify, and save…"
Friday
Brittany Watson posted a discussion

Groundcover Issues

Hello,I am hoping to get some clarity on how to modify and add groundcover. I have searched everywhere on the forum and online to find how to save a plant as .ArGroundcover, but I cannot find anything. I am using AccuRender Plant Editor and once I finish editing the plant that I want to use as a groundcover, I click "save plant as", but all it allows me to save as is .ArTree. I have a deadline to get this render finished, but I cannot for the life of me figure this out. See More
Friday
Roy Hirshkowitz replied to Roy Hirshkowitz's discussion AccuRender Studio
"Thanks, I'll check on the first two.  The third is normal behavior-- data conversion stops when the arstudio data is detected.  There is a command to remove the arstudio data which would allow you to start from scratch-- probably not…"
Apr 19
Peter Milner replied to Roy Hirshkowitz's discussion AccuRender Studio
"Two things don't seem to translate from nXt: Procedural bump and orientation of texture in a material.   Also, if a decal is changed using nXt, Studio continues to display the original decal. Editing the decal in the Studio material pallet…"
Apr 19
Peter Milner replied to Roy Hirshkowitz's discussion AccuRender Studio
"That sorted it - using the Studio camera and then selecting "Get AutoCAD view"."
Apr 19
Roy Hirshkowitz replied to Roy Hirshkowitz's discussion AccuRender Studio
"Interesting.  ArStudio has its own WalkAbout-like feture, it's the little camera button.  If you do it while the preview is running you should see the view changes automatically in the rendering."
Apr 19
Peter Milner replied to Roy Hirshkowitz's discussion AccuRender Studio
"I'm having trouble getting the desired view in Studio. I've tried setting the view in nXt walkabout and then using that to set the AutoCAD view. However, when I render from Studio, it gives me something different (see images below)."
Apr 19
Roy Hirshkowitz replied to Peter Milner's discussion Multiple cores
"There should be an Update Manager in the Start menu.  Grab and install 0267.  If this doesn't work I'll send a link."
Apr 16

© 2021   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service