AccuRender nXt

advanced rendering for AutoCAD

I am setting up an interior animation and would like some help on lighting.

 

The issue I am having is that I would like to find a better balance with the environment light coming through the exterior glass.  The space, particularly the ceiling, feel dark to me considering the large amount of windows lighting the space.

If I increase the sky intensity then it completely washes out the mullions which are important for me to show.  I also would like to see the clouds through the glass which is shown on other views. The cloud image is a planar map to a surface outside the glass. 

 

 I'll upload a small sample of the animation for an example as well.

 

I am using the sun, background at visible sky intensity at .001, interior lights on and sky at auto.

 

TSTC-1a:

cloud .75

sun 1

Sky intensity: .009

brightness: .30

 

TSTC-1b:

cloud .75

sun 1

Sky intensity: .5

brightness .30

 

TSTC-1c

same as b except brightness at 0

Views: 881

Attachments:

Reply to This

Replies to This Discussion

Draft segment of animation
Attachments:

Very nice little animation.  Have you considered a pano for this?  Seems like a good application for one....

As far as lighting goes, I can help you by checking to make sure nothing's wrong with the input to the simulation-- if you're willing to send the model.  Use the upload link if you decide to.  (I can't really help you to get the picture you want by "faking" it-- that'll be for others to try.)

If you want to check yourself-- things to watch out for include:

  • Make sure your units are correct (I think yours are, but it's the first thing I'd check.)
  • Make sure the output values for the luminaires are realistic for the project.
  • Note the # of light sources wrt the # of passes-- 8 light sources are calculated per pass.  (It may take a lot of passes to adequately resolve this interior.)

 

Thanks Roy:

I'm not really that intersted in taking alot of time to "fake" the image although I'm not going to be anal about making sure the lighting is correctly simulating the space either.  I didn't budget the time for it. My question for you is under a scenario where it's a cloudy day (cloudiness set to .75) then is it normal to place  the sky intensity down to the .009 range in order to see out of the window and/or not have the specular glow washout the window framing?

 

I'll be happy to post the model If you don't mind taking a look.  One odditiy is the wave ceiling.  It's a solid that I did a boolean subtract for the holes for the recessed cans.  When the light object was created it made a single solid for all the lights.  Not sure how nxt is looking at this fixture so my wattage values may be off for this one.

 

Thanks for the reply

 

It's hard to say-- what the tone-maping may be telling you is that there's a lot of glare coming from the windows.  If that area of your rendering is very much brighter than the rest of it-- that will happen.  That's actually decent information for the design-- the windows may need to be high ior (1.6 or so) or be tinted or laminated.

Of course, if the lighting values for the interior luminaires aren't good then it may be understating the amount of light inside.  The single solid object for a light does sound suspect.

 

Ultimately, if you need to get a certain picture regardless of what the simulation is telling you, then you may need to resort to things like drastically cutting the amount of daylight.  This is what I consider "fakery"-- as are devices like adding glow to your ceiling.  You're definitely fighting the product at this point, but it may be necessary.

I did boost the interior lighting a bit.  The cans are all being considered a single source (not great, but it will kind of work.)  I changed them from 500 watts to about 8800 (150000 lumens).  Doubled the brightness of the linear diffusers as well to bring them more in line w/ real-world values.

 

Here's what I get returning everything to defaults and using the path tracer.  It's not quite converged yet after 1.5 hours but you get the idea.  Sun and sky and background are all returned to 1.0.  Got rid of the background billboard (I'm not crazy about this approach-- prefer a spherical HDRI.) Cloudiness set to 0.2.  Put the daylighting on one channel and the artificial lights on another.  It looks pretty good to me in terms of simulated light transport.

 

Still think this is a great application for a panorama.  The packet tracer version was very slow-- I'm really surprised you got this to move at all.  Try using the Glossy switch where appropriate to improve performance.  Turn off all of the light sources you don't need.

I like what you have done and I appreciate the input.  Attached was my tweaked version from our conversation yesterday.  I added to omni lights to lighten the ceiling and plane.  Also bumped the glass to 1.8 ior and added a tint.  I like the floor reflections but they just are bogging me down too much so from an animation standpoint I just cant afford them. 

 

My system is processing about 1 frame an hour.  If I keep this pace it won't be done till Christmas.  I have to find a way to speed up the performance to meet my deadline.

 

I like the concept of the panorama but I am committed to delivering a self running animation to the client that highlights 4 rooms. This view of the terminal is the most difficult.  Is there a way to generate a single panorama of this terminal space. then export out to single frames a slow 360 turn around the room?  Then I could stitch together my intro's and transitions.  Any thoughts on how to accomplish this one? 

 

 

Attachments:

Maybe-- you'll certainly have to do a little research.

Check out this guy's stuff.  It was generated in the SketchUp (IRender) version of nXt and uses commercial panorama software by EasyPano.  I don't know if it can be fully scripted but it does spin by itself.  I can put you in touch with the user who created these.

I've heard that the Pure guys may have fully scripted players-- but you'll need to investigate.

 

I am getting different results.  Not sure where I'm going wrong on this one.  I have increased interior lights by double, increased wave spots from 500 to 9600.  Set glossy for floor which greatly improved my processing time, but I still cant get the exterior glass to keep from blowing out unless I drop the sun channel down to a really low range.  I feel like I'm doing something wrong here. 

 

Not your fault, no-- I get the same thing-- or something very similar with the Packet Tracer engine.  There is insufficient daylight reaching the center of the lobby-- not entirely unexpected given the shear number of daylight sources in this model.  There are things you can do to attempt to remedy this-- but I'm not even going to suggest anything here since it won't be appropriate for animation.  This is going to be a very, very difficult space to animate given the state of the art today.  Forcing the thing by radically altering the simulation to get closer to the picture you want may be your only option.

 

Panoramas.

 

I'm putting together panorama options for each of the space now.  Hopefully I can sell them on this approach. I think if I can get something to play this in a 360 like your link on the earlier post, then I can use a capture card to save it to a movie file.  I have an old version of premier to do transitions and save to an avi file.

 

I haven't played with pano's since back in ar3/smoothmove so this should be interesting. Does anyone have suggestions on a cheap, easy player?  :)

Attachments:

There was a discussion here a while back-- it might have some info.

 

This is a direct discussion on converting panos to avi.  The entire panoguide.com site is quite good for general pano. info.

RSS

Search

Translate

Latest Activity

OYEBANJI EMMANUEL posted a discussion

My V.R Panorama Project

Good day everyone.I have been working for sometime on a V.R panorama project. Its a personal project. I used sketchup to model and imported it into arstudio and rendered 6 panorama views at 3k pixel.Check it out here…See More
11 hours ago
Maciej posted photos
Nov 28
N` Goraw posted photos
Nov 21
Roy Hirshkowitz replied to LUIS CONTI's discussion AccurenderNXT for AutoCAD - urgent help please
"Hello Luis - per our email exchange in June, we're available to help with some training. I'll email you separately to schedule an online call."
Nov 19
OYEBANJI EMMANUEL replied to LUIS CONTI's discussion AccurenderNXT for AutoCAD - urgent help please
"You can mail me at ebanj88@gmail.com or whatsapp me on this line +2348164691476"
Nov 18
OYEBANJI EMMANUEL replied to LUIS CONTI's discussion AccurenderNXT for AutoCAD - urgent help please
"Hi LUIS CONTI, Welcome to the accurender forum. I can be of assistance to you to help solve your problems with accurender nxt for autocad for a token. I can teach you interior, exterior and walkthrough animation as i have done all these in the…"
Nov 18
LUIS CONTI posted a discussion

AccurenderNXT for AutoCAD - urgent help please

Hi everyone,I'm from Sydney Australia I worked for a company that use to operate Accurender NXT for AutoCAD. Unfortunately, the fella that use to know how to use it has retired.I only have just started to use the program now, but am struggling to understand how to best use it. I cannot get help from my fellow retire college as he has moved overseas and as he put it " wants to switch off " . Are there any users here from sydney australia, that could help me out with team viewer or zoom tutorial,…See More
Nov 17
cesar eduardo martinez torres posted photos
Nov 4

© 2024   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service