"Found 'Textured Mesh Support' only works with obj and 3ds Files which do not contain PBR Maps.
To 'obj' converted newer 3ds do not render in nXt :-("
advanced rendering for AutoCAD
Material Thumbnails
Hello All,
Installed newest NXTrender 64-bit on two new identical windows 7 64-bit machines with Autocad Architecture 2011 64-bit.
The armaterial thumbnails show up on one machine but not the other. I've tried registering the .dll as discussed in previous forum topics, but that does not work. Have also uninstalled and re-installed on the machine to no avail. Any other ideas?
Thanks
James
Views: 481
Replies to This Discussion
-
Permalink Reply by Roy Hirshkowitz on
-
Which .dll did you try registering and what was the result? You can run regsvr32 as many times as you want without hurting anything. Make sure you logoff/on after you resgister it.
-
Permalink Reply by James Milford on
-
I tried to register the ArMatThumb.dll first, also tried ArMatThumb64.dll.
I had at first tried running the reg.thumb.bat which came up with the error "The module "ArMatThumb64.dll" was loaded but the call to DllRegisterServer failed with error code 0x80070005".
After that was when I ran the regsvr32 command in administrator mode. again using both .dll's mentioned above. Message that came up was "The module armatthumb.dll failed to load. Make sure the binary is stored at the specified path or debug it to check for problems with the binary or dependent .DLL files. The specified module could not be found"
Have also logged off/on since.
-
-
Try one more time just to make sure-- I think you're on the right track. The file you need to register is armatthumb64.dll-- don't bother with the other one. It must be run from an elevated command prompt.
Try the following:
- Make sure you're logged in as an Administrator.
- In the start menu All Programs->Accessories right click in the command prompt and select Properties.
- Select Advanced and check the box marked Run as Administrator.
- Run the program-- you should get an Admin Command Prompt window.
- Navigate to the accurender folder-- usually cd "c:\program files\accurender nxt"
- Run regsvr32 on armatthumb64.dll.
Let me know if you get any error messages.
-
Permalink Reply by akinlolu olugboji on
-
I seems to have the same issues for AutoCad 2007 on a Win 8.1 64bits machine. Which way to go.
-
-
got this error thumbnails show in AutoCad 2016 64 bit but not on AutoCad 2007 on the same machine.
-
-
Great that worked! Thank you very much.
Search
Translate
Latest Activity
OBJ Plant Issue - Diffuse Maps
Hi to anyone;maybe a similar issue as Mr.Holz announced recently, (PBR Texture question):-added a obj. plant via 'Textured Mesh Objects' widget-reassigned maps (materials showed up, but with no maps attached, (although mtl. files are in the same folder as corresponding maps and obj files)-tried to render (see 'result')So my question is: Does anybody knew about how to handle Diffuse Maps in nXt, i suspect there is no interpretation of the UV-Coordinates?Any hints and help kindly appreciated!…See More
corten_pavillon_22mm_1
"Thanks for your kind words.
Yes, all plants are generated with nxt plant-editor.
I have used leaves from Marc Chaumier's plant library.
(Download/ Content + Entourage)"
corten_pavillon_22mm_1
"Very nice piece. Brilliant work.
Are all these plants nxt render plants ?
They look very good. Ground cover is so thoughtful."
"Thank you so much."
"Sorry, do not exactly how to do it right.
If i sent you one or sets, could you "compose" one material as an example?
Maybe this is interesting for others too.."
"Thanks Rich,
exacvtly what i found out.
Only did't know what to dfo with the AO map.."
© 2026 Header image courtesy Peter Milner
Powered by
