AccuRender nXt

advanced rendering for AutoCAD

Nxtwrite

Was muss ich tun, damit der Befehl Nxtwrite funktioniert. Welche LSP datei muss ich vorher laden??

Immer wenn ich den Befehl eingebe, kommt die Fehlermeldung "Unbekannter Befehl".

Alfons

Views: 337

Replies to This Discussion

Permalink Reply by Roy Hirshkowitz on November 12, 2013 at 12:28pm

(nxtwrite)

Include parentheses.

Permalink Reply by Alfons Akamp on November 13, 2013 at 1:54am

Verry good. Thank you.

Alfons

Permalink Reply by Maciej on February 24, 2014 at 12:18pm

(nxtwrite) seems not to work... See attachement.

Do I do anything wrong?

Permalink Reply by Roy Hirshkowitz on February 24, 2014 at 12:39pm

Is nxt loaded?

Permalink Reply by Maciej on February 25, 2014 at 6:13am

Yes, it is. I work with it in the meantime.

Permalink Reply by Roy Hirshkowitz on February 25, 2014 at 8:37am

What build do you have?

Permalink Reply by Maciej on February 25, 2014 at 9:30am

nxt studio - version 1.0.12, expires 2014-04-01

nXt - 1.0.239

Permalink Reply by Roy Hirshkowitz on February 25, 2014 at 9:45am

Hmmm... I did the following:

  1. Opened AutoCAD
  2. Typed nxt (to load nxt)
  3. Typed (nxtwrite)

Everything appeared to work normally.

Permalink Reply by Maciej on February 26, 2014 at 11:01am

Roy, now it works normally. I just re-loaded nxt and is ok.

... But no idea why it didn't work...  

Thank you.

RSS

Search

Translate

© 2026   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service