"Since there is no Ambient Occlusion Slot in 'Texture Set' Mode of the nXt-Material Editor,
I found another way around what to do with AO Maps:
Baking it into Diffuse; e.g. Multiplying AO Map over Diffuse/Albedo/Colour in…"
advanced rendering for AutoCAD
Pixel resolution
Good morning,
Attached is a section of an image with the following setup:
Path Tracer- On
Preset - Exterior
Sky - Auto
Sun - On
Background - Visible
Type - Sky
Rendered at 1954x1636
Passes - 600
Suggestions will be appreicated.
Rich Rosemann
Views: 162
- Attachments:
-
-
ALLMINE_PIXEL PLAN01.jpg, 706 KB
-
Replies to This Discussion
-
Permalink Reply by Roy Hirshkowitz on
-
This is likely a precision problem from a viewpoint being located too far away. An orthographic projection might work better (or might not.)
-
Permalink Reply by Rich Rosemann on
-
This is the same model with Path Tracer off. 10 passes
Rich Rosemann - Attachments:
-
-
ALLMINE_PIXEL PLAN03.jpg, 676 KB
-
-
-
It may still be a precision problem-- it's just luck if it shows up in one engine and not the other. One way for you to evaluate that would be to change projections or move the viewpoint closer-- if you get a very different answer it's precision. Some of the noise in the Path Tracer has a caustics look again-- make sure that's not enabled for the big tanks.
-
-
Hi Roy,
I made sure that no caustics were attached to the model. I will move closer and see if it changes. WIll lowering the render resolution help in this case (precision)?
It's just luck?
Rich Rosemann
-
-
No-- rendering resolution will not help.
If it's a precision problem that's happening it will be intermittent. Some times you'll get the right answer, sometimes you won't. Just luck at that point.
Search
Translate
Latest Activity
V1x copy
"The wooden texture of the TV-Console looks quite decent.
The Wallpaper on the left has an interesting structure, maybe it would look even better, if you make the texture seamless + applying a little bit of depth, e. g. with highpass - filter in PS?"
"Thank you for help on this topic!
Will test 'Automesher LT' (developed by Automapki), if I run into troubles again.
[Sometimes I was wondering about, if this forum is still alive... .]"
"Good day,
I searched the former forum posts and found another option to solve this problem which is another plugin to autocad-----AUTOMAPKI. You can give it a try."
Thallasso_Pre_Study_2_50mm
3ds +obj import works for older files-'xfrog-plants', for instance... .Comments + Critics appreciated!Hopefully accurender still survives!
"Found 'Textured Mesh Support' only works with obj and 3ds Files which do not contain PBR Maps.
To 'obj' converted newer 3ds do not render in nXt :-("
© 2026 Header image courtesy Peter Milner
Powered by
