AccuRender nXt

advanced rendering for AutoCAD

I use the scroll wheel on my mouse alot in autocad to zoom in and out and atmies to scroll up and down a list in standard windows programs.

Problem is after some time the scrolling become eratic. What could be the cause and also solution to the problem.

Views: 260

Reply to This

Replies to This Discussion

Hello Akinlolu,

The reason is probably dust which has accumulated below the scroll wheel over time.

You can unscrew the mouse remove the wheel and clean it with alcohol or something similar.

Of course getting a new mouse is another option. :P

Will give the cleaning a shot. It being long since I did this typs of cleaning in the days of track ball mouse, the ball was always clean, it the rollers that picks up the dirt from the ball.

A new mouse soon goes to this state of eraticness after a few weeks.

thanks for the tip

Have you installed the proper mouse software (from its manufacturer) or it just uses some generic Windows drivers? Maybe you could start from there, before you disassemble the mouse ;)

It is a generic windows driver. No installation software came with the mouse.
Gotten another one for now so should I pull this apart and cannot put it back together again, I would not be mouseless

RSS

Search

Translate

Latest Activity

Maciej commented on Maciej's photo
Thumbnail

c3

"BTW - Ant idea how to get rid of this "grain"? More than 500 passes (Path Tracer) and only HDR lighting. Unfortunately to no avail..."
2 hours ago
Maciej commented on Maciej's photo
Thumbnail

g2

"Thank you George."... I always avoid to change material - colour - surface quality on the outer corners, but only on inner ones. " - So do I.  Client's wish.  :)"
2 hours ago
George Ioannidis commented on Maciej's photo
Thumbnail

g2

"Very contemporary feel of space here Maciej! Great job!"
Saturday
George Ioannidis commented on Maciej's photo
Thumbnail

g2

"A note off topic, clearly subjective: I always avoid to change material - colour - surface quality on the outer corners, but only on inner ones."
Saturday
Maciej posted photos
Thursday
Peter Milner replied to Peter Milner's discussion AutoCAD 2021
"I think we'll need to renew our license first before installing the latest version. I'll let you know how it goes."
Mar 31
Rich Hart replied to Peter Milner's discussion AutoCAD 2021
"Try installing the latest version on this downloads page: http://renderplus.com/wp2/download/?product=autodesk It works for me with AutoCAD 2021."
Mar 27
Peter Milner posted a discussion

AutoCAD 2021

Is there a new version of Accurender to work with AutoCAD 2021.I've tried loading my existing version in, but it doesn't work.See More
Mar 27

© 2020   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service