AccuRender nXt

advanced rendering for AutoCAD

Units Problem

I am currently working on a rendering that clearly has a units issue. I remember there are two unit commands, however I can only remember DDUNITS/UNITS. Whats the other command?

Right now my grass is knee high & my bricks are as tall as a person; so somewhere the units are set to mm, but I can't find it.

Thanks

Views: 213

▶ Reply to This

Replies to This Discussion

Permalink Reply by akinlolu olugboji on July 8, 2013 at 12:01pm

Type, 'insunits' at the command prompt, if you are working in mm then it should be set to 4.Hope this helps.

 

Permalink Reply by Wayne Williamson on July 8, 2013 at 12:10pm

Thank you very much! That was the command that I needed.

Permalink Reply by akinlolu olugboji on July 8, 2013 at 12:24pm

You are welcome!

RSS

Search

Translate

Latest Activity

Thorsten Hedrich posted a discussion

OBJ Plant Issue - Diffuse Maps

Hi to anyone;maybe a similar issue as Mr.Holz announced recently, (PBR Texture question):-added a obj. plant via 'Textured Mesh Objects' widget-reassigned maps (materials showed up, but with no maps attached, (although mtl. files are  in the same folder as corresponding maps and obj files)-tried to render (see 'result')So my question is: Does anybody knew about how to handle Diffuse Maps in nXt, i suspect there is no interpretation of the UV-Coordinates?Any hints and help kindly appreciated!…See More
yesterday
0 Comments
Thorsten Hedrich commented on Thorsten Hedrich's photo
Thumbnail

corten_pavillon_22mm_1

"Thanks for your kind words. Yes, all plants are generated with nxt plant-editor. I have used leaves from Marc Chaumier's plant library. (Download/ Content + Entourage)"
Feb 1
OYEBANJI EMMANUEL commented on Thorsten Hedrich's photo
Thumbnail

corten_pavillon_22mm_1

"Very nice piece. Brilliant work.  Are all these plants nxt render plants ? They look very good. Ground cover is so thoughtful."
Jan 31
Thorsten Hedrich posted photos
Thumbnail
Thumbnail
Jan 28
OYEBANJI EMMANUEL replied to OYEBANJI EMMANUEL's discussion Questions for nxt render for autocad
"Thank you so much."
Jan 22
Daniel Holz replied to Daniel Holz's discussion PBR Textures in nxtRender for Autocad
"Sorry, do not exactly how to do it right. If i sent you one or  sets, could you "compose" one material as an example? Maybe this is interesting for others too.."
Jan 2
Daniel Holz replied to Daniel Holz's discussion PBR Textures in nxtRender for Autocad
"Thanks Rich, exacvtly what i found out. Only did't know what to dfo with the AO map.."
Dec 31, 2025
Rich Hart replied to Daniel Holz's discussion PBR Textures in nxtRender for Autocad
"nXtRender doesn't use the AO texture image settings for anything, so don't bother trying to use that. I would start use the Diffuse textures at 100% and experiment with the levels of the Specular Reflection. You might need to toggle the…"
Dec 30, 2025

© 2026   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service