Unable to Load Nxt file

[akinlolu olugboji]

Any time I launch AutoCad 2014 64bit on Win10. I get this error.

Nxt still works when I type, "nxt" into the command prompt.

Why and how can I remove it?

[akinlolu olugboji]

I have AutoCad 2010 64bit and 2007 32 bit on the same pc but those do not launch this error splash.

[Rich Hart]

If you comfortable using Regedit to open the registry, can you send me an export of the HKEY_LOCAL_MACHINE section of your registry?

I can take a look at that export file and see if there is an entry for AutoCad 2010 to run "AccuRender nXt.arx".

Let me know if you need help exporting  a section of the registry.

You can use this link to send us a large file:

http://www.renderplus.com/wp2/uploads/

[akinlolu olugboji]

The splash screen only comes up on AutoCad 2014.

I just click ok and it is gone. 

When I need nxt I just type at the command prompt to launch nxt. 

[akinlolu olugboji]

You are right about 350MB still uploading.

[Rich Hart]

I'll take a look at the file when it gets here.

Meanwhile, I should have asked you this first, have you looked in the StartUp Suite to make sure that  the module "AccuRender nXt.arx" was not listed there?

Also, have you looked to see if there was a file "acad.rx" in The AutoCAD 2014 program Files folder that might have "AccuRender nXt.arx" listed as a module to load?

[akinlolu olugboji]

Sent

[akinlolu olugboji]

Unless am doing something wrong the file is only 2KB

[Rich Hart]

That just shows the entry for the AutoCAD 2014. That looks OK.

To export a .reg file with all the HKEY_LOCAL_MACHINE section included, select the section, as shown below, and then export a file. Then I can search the huge file it creates and see if anything besides the AutoCAD 2007 entries point to "AccuRender nXt.arx". You can also do that yourself,  by searching the whole registry for "AccuRender nXt.arx".

[akinlolu olugboji]

Here is a screen shot

[Rich Hart]

The only reference to loading the module "AccuRender nXt.arx" in the registry file that you sent me was for AutoCAD 2007, R17.0:

[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Autodesk\AutoCAD\R17.0\ACAD-5001:409\Applications\ACCURENDER]
"DESCRIPTION"="AccuRender"
"LOADCTRLS"=dword:00000004
"LOADER"="C:\\Program Files\\AccuRender nXt\\AccuRender nXt.arx"

So I would then suspect that "AccuRender nXt.arx" is listed either in the StatUp Suite, or in an acad.rx file in the AutoCAd 2014 Program files folder. try looking in those places.

[akinlolu olugboji]

OK