"Thank you for help on this topic!
Will test 'Automesher LT' (developed by Automapki), if I run into troubles again.
[Sometimes I was wondering about, if this forum is still alive... .]"
advanced rendering for AutoCAD
Artifacts in a solid without textures...
The areas affected by these artifacts were subtracted from the solid cylindrical structures with swept polyline path. I tried to upgrade to the latest version of NXT, but the result is the same. I use 64bit Windows7, Autocad 2011, 8GB, I do not understand the cause! It's a bug? Any ideas ......
Views: 149
- Attachments:
-
-
X5 NXT.jpg, 565 KB
-
Replies to This Discussion
-
Permalink Reply by Marc Chaumier on
-
Sometimes, it happen when you have 2 or more solids, faces, at the same place. But the artefact is not so regular.
Good modelisation!
-
Permalink Reply by Carlos Sieiro on
-
Sure, I had never encountered such a geometrical artifact. Relieved or reduced by changing the perspective ... I have no idea ....
Thanks Marc ..
-
Permalink Reply by Roy Hirshkowitz on
-
This sort of thing is usually a precision problem. Make sure your units are correct and that the WCS origin isn't too far away. Other than that I'll need to take a look at it. Use the upload link.
-
-
I moved the model close to the point 0,0,0.
I put nxt to work and continues to generate artifacts in the same place, depending on where you place your perspective, the artifacts are more or less ....
Attached is a picture with the detail and due to the weight of the file, I sliced the solid in the affected area and proceed to upload it for analysis .....
Thanks in advance
-
-
The units for this model is listed as millimeters (_INSUNITS=4), yet it appears to be drawn in meters. This could be the source of the problem. Try changing the units to meters.
Also-- FACETRES is set to its default of 0.5. You can try a value like 2 or 3 to see if it makes a difference.
-
-
Hi Roy, sorry for the late reply.
I modified the value _insunits 6 (meters). _Ddunits Are also in meters. Facetres in value 5. I uploaded the value of e _Isolines _Splinesegs.
The result is the same. The artifacts reappear. The problem is always solid cylinders or revolutioned splines, any other ideas?Thank you again...
-
-
I wasn't able to reproduce the artifacts here. If you want to try again, you need to send a model with the correct view required to reproduce. Make it a WalkAbout view with fixed resolution (not viewport) so my screen will exactly match yours.
Search
Translate
Latest Activity
"Good day,
I searched the former forum posts and found another option to solve this problem which is another plugin to autocad-----AUTOMAPKI. You can give it a try."
Thallasso_Pre_Study_2_50mm
3ds +obj import works for older files-'xfrog-plants', for instance... .Comments + Critics appreciated!Hopefully accurender still survives!
"Found 'Textured Mesh Support' only works with obj and 3ds Files which do not contain PBR Maps.
To 'obj' converted newer 3ds do not render in nXt :-("
OBJ Plant Issue - Diffuse Maps
Hi to anyone;maybe a similar issue as Mr.Holz announced recently, (PBR Texture question):-added a obj. plant via 'Textured Mesh Objects' widget-reassigned maps (materials showed up, but with no maps attached, (although mtl. files are in the same folder as corresponding maps and obj files)-tried to render (see 'result')So my question is: Does anybody knew about how to handle Diffuse Maps in nXt, i suspect there is no interpretation of the UV-Coordinates?Any hints and help kindly appreciated!…See More
corten_pavillon_22mm_1
"Thanks for your kind words.
Yes, all plants are generated with nxt plant-editor.
I have used leaves from Marc Chaumier's plant library.
(Download/ Content + Entourage)"
corten_pavillon_22mm_1
"Very nice piece. Brilliant work.
Are all these plants nxt render plants ?
They look very good. Ground cover is so thoughtful."
© 2026 Header image courtesy Peter Milner
Powered by
