AccuRender nXt

advanced rendering for AutoCAD

New Build (318)

Adds support for *.skp files to the Texture Mesh Object.  Performance is a little slow for large files.  Let me know if it works.

See what's new for more info.

Views: 1580

▶ Reply to This

Replies to This Discussion

Permalink Reply by Miguel Tano Adanes on December 14, 2012 at 8:49am

Thanks Roy. Yes, in fact I think I'm spending too much time in low quality models...

Permalink Reply by Peter Norwood on January 21, 2013 at 9:37am

Hi,

I have bee using NXT 1.0.271 since it came out and am a little confused on how to upgrade.

in AR3 and then AR4 I used to down load a upgrade file but don't see that now.

Thank you

Peter Norwood

http://uhaweb.hartford.edu/norwood/

Permalink Reply by Roy Hirshkowitz on January 21, 2013 at 9:57am

The latest nXt on the download page will work fine with your current license.  Select "Download for use with Purchased License".  Just run the installer after downloading.

Permalink Reply by Peter Norwood on January 21, 2013 at 10:14am

Thank you very much.

Could you please tell me if I have a commercial license or an educational license.

I think I had an educational license with AR3 and AR4 but may have a full NXT.

Thanks again

Peter Norwood

Permalink Reply by Roy Hirshkowitz on January 21, 2013 at 11:18am

You've got a standard nXt license.  Educational licenses have not (to date) been offered for this product.

Permalink Reply by Peter Norwood on January 21, 2013 at 11:40am

Thanks much

Permalink Reply by Rich Rosemann on January 21, 2013 at 1:56pm

Hello Roy

 

Is this an unrelated problem when trying to opening a .skp model?

 

"Application failed to start because MSVC100.DLL was not found.  Re-installing my fix the problem."

 

 

Permalink Reply by Roy Hirshkowitz on January 21, 2013 at 4:10pm

Yep, different problem.  Try downloading and installing from here and let me know.  These may refuse to install.

Permalink Reply by Rich Rosemann on January 22, 2013 at 7:35am

Good morning Roy,

 

I installed the MS visual c++ 2010 and ran the repair for  Net Framework 4 as recommanded from the web for XP-64.

 

No change.  Nxt will ask for an insert location and then display the error.

Any other suggestions other than reinstalling the previous build?

 

Permalink Reply by Roy Hirshkowitz on January 22, 2013 at 8:00am

The link I gave you was for x86 (32 bit)-- did you install that one or the one for x64?  If so you need to try to install the one for x86.

Permalink Reply by Rich Rosemann on January 22, 2013 at 8:27am

I did install the one for the X64 bit system.  Will try the 32 bit .

 

Permalink Reply by Rich Rosemann on January 22, 2013 at 8:41am

Success.  It's all in the numbers.

The model inserted without a hitch, materials and all.  As noted earlier, the material scales will need to be edited at times.  All materials attached to the test model I inserted came in with a scale of 1x1 with the model scaled correctly.

Super programming, Roy.  Great up-grade.

Thanks for the help.

 

RSS

Search

Translate

Latest Activity

Thorsten Hedrich replied to Daniel Holz's discussion PBR Textures in nxtRender for Autocad
"Since there is no Ambient Occlusion Slot in 'Texture Set' Mode of the nXt-Material Editor, I found another way around what to do with AO Maps: Baking it into Diffuse; e.g. Multiplying AO Map over Diffuse/Albedo/Colour in…"
Apr 16
OYEBANJI EMMANUEL commented on OYEBANJI EMMANUEL's photo
Thumbnail

V1x copy

"Thank you so much. I appreciate your kind words."
Apr 7
Thorsten Hedrich commented on OYEBANJI EMMANUEL's photo
Thumbnail

V1x copy

"The wooden texture of the TV-Console looks quite decent. The Wallpaper on the left has an interesting structure, maybe it would look even better, if you make the texture seamless + applying a little bit of depth, e. g. with highpass - filter in PS?"
Apr 6
Thorsten Hedrich posted a photo
Thumbnail

thalasso_spa_sw

- little closer to what we thought of -
Apr 1
0 Comments
Thorsten Hedrich replied to Thorsten Hedrich's discussion OBJ Plant Issue - Diffuse Maps
"Thank you for help on this topic! Will test 'Automesher LT' (developed by Automapki), if I run into troubles again. [Sometimes I was wondering about, if this forum is still alive... .]"
Mar 22
OYEBANJI EMMANUEL replied to Thorsten Hedrich's discussion OBJ Plant Issue - Diffuse Maps
"Good day, I searched the former forum posts and found another option to solve this  problem which is another plugin to autocad-----AUTOMAPKI.  You can give it a try."
Mar 21
Thorsten Hedrich posted a photo
Thumbnail

Thallasso_Pre_Study_2_50mm

3ds +obj import works for older files-'xfrog-plants', for instance... .Comments + Critics appreciated!Hopefully accurender still survives!
Mar 4
0 Comments
Thorsten Hedrich replied to Thorsten Hedrich's discussion OBJ Plant Issue - Diffuse Maps
"Found 'Textured Mesh Support' only works with obj and 3ds Files which do not contain PBR Maps. To 'obj' converted newer 3ds do not render in nXt :-("
Feb 21

© 2026   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service