AccuRender nXt

advanced rendering for AutoCAD

Acad 2013 crashed

Bei mir stürzt Acad 2013 64 bit immer ab, sobald ich Ar5 starte.

Ist das Problem bekannt und was ich dagegen machen??

Ich habe das neueste Service Pack 2 installiert.

Was mache ich falsch??

Views: 147

▶ Reply to This

Replies to This Discussion

Permalink Reply by Roy Hirshkowitz on March 7, 2014 at 9:41am

Any drawing or a specific drawing?  If you open a blank drawing and type "nXt" what happens?

Permalink Reply by Alfons Akamp on March 7, 2014 at 9:51am

Wenn ich ein geöffnetes Autocad 13 ohne Zeichnung habe und dann Ar5 eingebe ist alles O.K.

Sobald ich jetzt aber eine grössere Zeichnung lade (ca 100 MB) und ich jetzt nxt eingebe stürtzt Acad 2013 ab.

Bei Acad 2011 und Ar5 passiert auf dem gleichen Rechner kein Absturz und AR5 rendert sauber.

Was ist bei Acad 2013 64 Bit anders??

Permalink Reply by Roy Hirshkowitz on March 7, 2014 at 10:32am

Can it render a smaller drawing?

When does the large drawing crash--  when you first load nXt or when you start a rendering?  

How does it crash?  Does it just hang, does AutoCAD just shut down and go away, or is there an error message?

Permalink Reply by Alfons Akamp on March 7, 2014 at 10:42am

Wenn ich nxt lade stürtzt Acad2013 ab.

Fehlermeldung. Ich habe zuwenig Arbeitsspeicher.

Dabei hat mein Rechner 24 GB Arbeitsspeicher.

Permalink Reply by Roy Hirshkowitz on March 7, 2014 at 10:49am

Read my previous response carefully.  Answer all of the questions I asked beginning with the first one and ending with the last. If you don't answer the questions, it's much harder for me to figure out what's happening.

Your response above translated to "when I download nxt crashes Acad2013".   This doesn't make sense in English.  Try expressing it a little different.  Does it crash when you first type "nxt" at the command line, when you start a rendering, when you load the drawing with nXt loaded?

Permalink Reply by Alfons Akamp on March 7, 2014 at 2:15pm

Ich habe ein wenig weiter getestet.

Wenn ich eine kleine Zeichnung (ca. 40 MB) öffne und danach AR5 starte klappt alles wunderbar.

Wenn ich aber eine 100 MB Zeichnung öffne und danach nxt starte, stürzt Autocad 2013 ab mit der Fehlermeldung

Zu wenig Arbeitsspeicher.

Ich habe 24 GB eingebaut.

Permalink Reply by Roy Hirshkowitz on March 7, 2014 at 2:32pm

Try an audit on the large drawing, see if it picks up any problems.

Permalink Reply by Alfons Akamp on March 7, 2014 at 3:14pm

Und hier ist die Fehlermeldung

Permalink Reply by Alfons Akamp on March 8, 2014 at 2:07am

Check the large drawing did not yield any problems. Alles i.O.

Permalink Reply by Alfons Akamp on March 9, 2014 at 6:26am

Kommt AR5 eigentlich mit sehr grossen Dateien sprich 300 MB und grösser zurecht oder nicht??

Hat das schon mal einer getestet in den USA??

RSS

Search

Translate

Latest Activity

John Ferris posted a discussion

AutoCad 2026

Roy/ All,Currently use AR5 with AutoCad Architecture 2017. Have, and typically use ACAD 2022, but AR5 doesn't load, so I revert back to 2017 when it's time to use AR5).Long time user...had to create new profile due to Architecture firm closing (boss retired). Am now with GC firm and have been using old computer from Arch firm (Boxx Apexx 2) with above mentioned software. Been working fine. Just got new new computer, and am updating software.Downloaded AutoCad Architecture 2026. Where can I get…See More
Apr 23
0 Comments
Orbe3D commented on OYEBANJI EMMANUEL's photo
Thumbnail

interior 1x1_2015-2024-08-26-16-55-09x

"Beautiful. You can also check our 3d modeling"
Apr 9
Orbe3D commented on OYEBANJI EMMANUEL's photo
Thumbnail

V6x copy

"Beautiful"
Apr 9
Roy Hirshkowitz replied to Maciej's discussion nXt + AutoCAD 2025
"Resolved via email (support@renderplus.com)"
Feb 20
Maciej posted a discussion

nXt + AutoCAD 2025

Gentlemen,The last file I used to load, was ArAcad_24_64.arx, and, unfortunately, it doesn't work with Acad 2025.Any idea how to get the proper nXt-App which suits Acad 2025?Any help appreciated...Regards, Maciej MarkowskiSee More
Feb 17
1 Comment
OYEBANJI EMMANUEL replied to OYEBANJI EMMANUEL's discussion CAN WE GET PETER MILNER TO TRAIN SOME OF US FOR A TOKEN ?
"I meant Chris Fox, not David."
Feb 13
OYEBANJI EMMANUEL posted a discussion

CAN WE GET PETER MILNER TO TRAIN SOME OF US FOR A TOKEN ?

Good day, forum members,I was thinking that we could each, if interested, contribute a significant token to give Peter Milner and David to train us virtually in nxt render for Autocad. Am not sure he still uses it but the experience he has spanning over 20 years cannot be underestimated. I wish the forum co-ordinators could look into this. So that more of us will produce realistic renders with the paid version of nxt render and we will be able to encourage other users of other more advanced…See More
Feb 12
1 Comment
OYEBANJI EMMANUEL commented on OYEBANJI EMMANUEL's photo
Thumbnail

V3x copy

"Thanks"
Feb 11

© 2025   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service