advanced rendering for AutoCAD
Artifacts in a solid without textures...
The areas affected by these artifacts were subtracted from the solid cylindrical structures with swept polyline path. I tried to upgrade to the latest version of NXT, but the result is the same. I use 64bit Windows7, Autocad 2011, 8GB, I do not understand the cause! It's a bug? Any ideas ......
Views: 87
- Attachments:
-
-
X5 NXT.jpg, 565 KB
-
Replies to This Discussion
-
Permalink Reply by Marc Chaumier on
-
Sometimes, it happen when you have 2 or more solids, faces, at the same place. But the artefact is not so regular.
Good modelisation!
-
Permalink Reply by Carlos Sieiro on
-
Sure, I had never encountered such a geometrical artifact. Relieved or reduced by changing the perspective ... I have no idea ....
Thanks Marc ..
-
Permalink Reply by Roy Hirshkowitz on
-
This sort of thing is usually a precision problem. Make sure your units are correct and that the WCS origin isn't too far away. Other than that I'll need to take a look at it. Use the upload link.
-
-
I moved the model close to the point 0,0,0.
I put nxt to work and continues to generate artifacts in the same place, depending on where you place your perspective, the artifacts are more or less ....
Attached is a picture with the detail and due to the weight of the file, I sliced the solid in the affected area and proceed to upload it for analysis .....
Thanks in advance
-
-
The units for this model is listed as millimeters (_INSUNITS=4), yet it appears to be drawn in meters. This could be the source of the problem. Try changing the units to meters.
Also-- FACETRES is set to its default of 0.5. You can try a value like 2 or 3 to see if it makes a difference.
-
-
Hi Roy, sorry for the late reply.
I modified the value _insunits 6 (meters). _Ddunits Are also in meters. Facetres in value 5. I uploaded the value of e _Isolines _Splinesegs.
The result is the same. The artifacts reappear. The problem is always solid cylinders or revolutioned splines, any other ideas?Thank you again...
-
-
I wasn't able to reproduce the artifacts here. If you want to try again, you need to send a model with the correct view required to reproduce. Make it a WalkAbout view with fixed resolution (not viewport) so my screen will exactly match yours.
Search
Translate
Latest Activity
Render 1 copy (1)
This is a remake of one of Peter Milner's scenes. I dont have the file. I photo-matched it in sketchup and rendered in nxt render for autocad.I just retouched it and increased the resolution.
Render 1
This is a remake of one of Peter Milner's renders.I dont have the file. I photo-matched the scene in sketchup and rendered with nxt render in autocad.I replicated it.
00001 copy
An office render i did recently.Critics and comments are welcome.Its one of the frames of a walkthrough animation i did recently.I used sketchup to model, exported to autocad and rendered with nxt render.
nxt render Course/tutorial
Good day Sir,I want to know the number of people that would be interested in a nxt render course because i plan to create one.Please send me a prompt reply if you are interested.Just sayHi am in.Checkout a walkthrough i just created recently with nxt render for autocad after modelling in sketchup and then post-producing in photoshop.…See More
"Good day Sir,
Hope this message meets you well.
I just completed a short walkthrough of an office.
Its down here
https://drive.google.com/file/d/1L4p5Iyiq5MiSK137UT1eH3POuiI5ZLDA/view?usp=drive_link"
© 2024 Header image courtesy Peter Milner
Powered by
