AccuRender nXt

advanced rendering for AutoCAD

pls i was trying build 258 with trial version, since yesterday if i edit my materials it will not  show the new material that i assign to it  not until i edit other materials or  re open the model. i dont know what the problem is about. av check everything even using different model.

Views: 45

Reply to This

Replies to This Discussion

Using the same build but no problem, so state step by step what you are doing and why you are not getting result.
1 edit a material from red colour to blue and rendered  it changes to blue, and am not satisfy with that blue and change it to red and rendered it but refuse to change to red. re assign different colour still blue.if i edit another material and rendered it it will now change to red.that is the scenario.

use the remove material button in Nxt UI under the material panel to remove materials attched to the objects (which over rides your layer material assignment) which I believe is why the materials are not updating.

 

Attachments:
This is likely a different problem.  I'll have it fixed soon.  In the meantime, you may need to force a drawing reload when editing materials.  Delete an object and oops it-- for example.

RSS

Search

Translate

Latest Activity

Rich Hart replied to Paul Jackson's discussion Bricscad
"Unfortunately, we don't have a version that works with BricsCAD now, and that older trial version cannot be reinstated."
Jun 19
Alfons Akamp replied to Paul Jackson's discussion Bricscad
"Ich habe hier auch eine nxtrender Version für Bricscad 15. Die sieht anders aus, als die von Acad. Leider ist auch bei mir der Testzeitraum schon lange abgelaufen. Gibt es die Möglichkeit mir eine Testlizenz dafür zuzuschicken??…"
Jun 19
George Ioannidis commented on Chris Fox's photo
Thumbnail

Bedroom

"Another good rendering. Those two photoshopped reading lights are not looking good though. They don't follow the perspective, the left one is higher than the right one. Also, they are supposed to be turned on (judging from the light on wall…"
Jun 15
George Ioannidis commented on Chris Fox's photo
Thumbnail

Single Family Home

"Great image as always. I would just blur the tree shadow on the lawn to match soft shadows on the building. Nice blending of cut-out greenery. Excellent job."
Jun 15
George Ioannidis commented on Chris Fox's photo
Thumbnail

Railroad kitchen

"Very nice rendering Chris! The only thing that distracts me is the fruit bowl. It's too evidently pasted in PS.  Another thing (nothing to do with rendering) is the microwave above the stove. I would rather expect a cooker hood there."
Jun 15
akinlolu olugboji posted a discussion

trim and extension command

On AutoCad 2021.The trim and extension command works funny. I initiate the command then click the cutting edge (press entre) then click the lines I need to trim or extend.Now I initiate the command and as soon as I click the object selected trims or extend.  How can I correct this, it is really affecting my work?See More
Jun 14
Chris Fox posted photos
Jun 12
ebenezer attah koomson posted photos
Jun 3

© 2020   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service