AccuRender nXt

advanced rendering for AutoCAD

just wanted to get everyone's feedback on this, i was wondering if there is any move to incorporate the help of GPU in conjunction with the current CPU for rendering. the program is very good but only thing that lets it down is rending speed.....it's like watching grass grow. especially if you are rendering 3 images at a time. i have a lot to do in a small amount of time so multiple renders is my main option only im sitting around waiting 10 to 20 hrs for them all to render to an acceptable standard. I GPU help was incorporated into this it would be the best improvement so far.

let me know your thoughts about this.

Views: 308

Reply to This

Replies to This Discussion

Search GPU first-- it's been discussed many times.  If you have further questions let me know.

thanks Roy, i know it has been bought up before i just thought if i kept bringing it up that it might be incorporated in the near future. is there any chance of that happening at all mate?

No.  It's a big project-- not something that can be implemented quickly.  Supporting the Intel based high-performance architecture, Xeon Phi and it's descendents, is much easier.

no problems, thanks Roy. can i ask you one more thing what cpu would you suggest would be best to run to get more speed out of it? i currently have an 8 core AMD CPU with 16gb memory but its just not fast enough once you start doing hi res (16cm X 10cm) which is not really that large. any suggestions?

The best thing you can do, by far, is reduce the resolution somewhat and use Photoshop or eq. to upsample to your target resolution.  Changing engines can help-- if you're using the Standard engine with a lot of plants and indirect lighting you might find the Hybrid to be faster.

Multiply # of physical cores x clock speed to get a good rule of thumb as to how fast your system will be.

Hi Roy sorry to bother you again, that Xeon Phi coprocessor you mentioned. i have been doing a bit of research on it can you tell me, is that like a graphics card but for CPU expansion? if it just plugs into the graphics card port i think that could be exactly what i need. i just can't find a lot of info about the install on the net though. thanks mate

It won't help you yet, the software still has to be adapted for it.  It plugs into a PCI-e 3.0 expansion slot, I believe.  Most newer computers have these.

thanks Roy, big help mate. i think this will be the main option for me once the software comes about. i currently have an 8 core AMD 3.6ghz with 16gb ram and im maxing that out with 3 images at a time. the other option now i was thinking about is render farming. is there some software i can buy from you that will harness all computers connected to my network? thanks mate

There is a render farm available.  You can try a two node farm for free and decide if you want to purchase an unlimited license.  Whether it helps or not can depend on the nature of the other machines available for your use (matching slow and fast machines on a farm usually doesn't work), speed of network, etc.. 

RSS

Search

Translate

Latest Activity

Roy Hirshkowitz replied to Chad Kauffman's discussion Licensing Issues
"Send me a private msg with your info."
Wednesday
Chad Kauffman posted a discussion

Licensing Issues

Upgrading a couple of machines and also switch a user profile. I need our current license code to update. Thanks,See More
Tuesday
Kevin Lockwood replied to MES's discussion Animation using WalkAbout in CAD.
"Its been years for me too.  I think Daniel spent some time getting CoMotion running again.  http://www.accustudio.com/marketplace/comotion As to stitching frames, the tool I used to use wasn't working last time I tried, but I did…"
Nov 15
Rich Rosemann replied to MES's discussion Animation using WalkAbout in CAD.
"Is CoMotion no longer being updated?"
Nov 11
Roy Hirshkowitz replied to MES's discussion Animation using WalkAbout in CAD.
"Sorry you're not getting a better response here-- our animation stuff is pretty rudimentary.  Hoping someone will still chime in though.  I haven't looked at this stuff for such a long time, my guess is that the software I used…"
Nov 8
MES posted a discussion

Animation using WalkAbout in CAD.

Hi,I want to create a "fly thru" or "walk thru" animation using Nxt in CAD 2015.  Anyone has experience with this and would like to share how to use it? Any important tips?Thank you!See More
Nov 7
Roy Hirshkowitz replied to Enrico Gheno's discussion Perspective between 3D model and background image on NXT autocad 2015
"There are a couple of ways to do this-- In nXt the WalkAbout window allows you to insert and manipulate background images and your viewpoint independently.  You can either allow nXt to composite the image for you, or save the thing with a…"
Nov 4
Enrico Gheno posted a discussion

Perspective between 3D model and background image on NXT autocad 2015

Hi, I would like to insert my 3D model on an image in background, obviously with the correct position, size and perspective lines.Is there a method to move the 3D model to adapt it at the image in background?At the moment i can only try to setting the position of my 3D model with the Autocad camera and launch the render to control if the position is correct, but it's impossible to find it. I must render my 3D model and put it in my image with Photoshop. Not a great result.Look down here, the…See More
Nov 3

© 2019   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service