AccuRender nXt

advanced rendering for AutoCAD

pls guys av been trying to map this pix to this solid , i was using object properties and cylindrical decals, am sure am doing something wrong. kindly help. i attached the dwg, the pix and the one that i rendered which is not where am going.

Views: 354

Attachments:

Reply to This

Replies to This Discussion

Reattach drawing. it previews but does not open in autocad

THIS IS IT

Attachments:

Same problem what version of autocad are you using? Try saving as 2000 before reattaching. 

converted to acad 2000

Attachments:

The drawing reads fine here.  What are you trying to do?  I have no idea what you want the picture to look like and what you're getting instead.

i was trying to map the coke jpeg to the  longer side (curve) of the solid, since i was unable to do it thats why i map it on a box drawn on the curve side. pls check the attachment above.

thanks.

If you're trying to get the letters to run along the long axis, you'll need to first rotate the map 90 degrees in PhotoShop or eq. and save the rotated bitmap.  (nXt's cylindrical mapping only maps in the other direction, like mapping a label onto a soup can.)  Once you've got your bitmap it's easier to apply if you take a little time to set up a UCS aligned to the cylinder.  Set the Z-Axis equal to the axis of the cylinder, and set the origin to the center of the lower face.  You should be able to cylindrically map the decal at that point.  If you're still having problems let me know.

 

is still not working thanks.

Here's what I get:

 


Not sure if this is what you want.  I had to draw a circle at the end of the object to help me out.

 

Drawing and rotated bitmap attached.

Attachments:

Oops-- not sure I saved the drawing before I attached it.  Try this one.

Attachments:

yes thanks this is what i want.but i did not understand yur procedure of drawing circle(where).

There isn't a fixed procedure-- do whatever you need to help you out.  I drew a circle at the end of your object and aligned the UCS to the circle.  

Adding the decal wasn't difficult, but it did take me five minutes or so with a couple of failed attempts (mostly to do with the UCS, getting the osnaps right, getting the ortho lock right, etc..  All AutoCAD stuff.)

RSS

Search

Translate

Latest Activity

Roy Hirshkowitz replied to norton torres's discussion I GOT AN ERROR WHILE RENDERING IN AUTOCAD 2010
"I'm guessing it's the same problem.  nXt has to be present for a conversion to work properly with a drawing that has nXt data.  That's a known issue.  Converting using any other method probably will not work properly if…"
Aug 23
George Ioannidis replied to norton torres's discussion I GOT AN ERROR WHILE RENDERING IN AUTOCAD 2010
"I think Norton mentioned that he did the conversion using TrueView, not the AutoCAD itself. He is still on ver. 2010 I suppose, otherwise he could do renderings directly in 2018. Maybe TrueView isn't quite versionwise correct as regards to…"
Aug 21
Roy Hirshkowitz replied to norton torres's discussion I GOT AN ERROR WHILE RENDERING IN AUTOCAD 2010
"One additional thought.  A known issue when saving drawings to a previous version is that nXt must be loaded and running before you convert the drawing. Try the following: 1. Open your 2018 drawing in AutoCAD. 2. Start nXt by typing…"
Aug 1
Roy Hirshkowitz replied to norton torres's discussion I GOT AN ERROR WHILE RENDERING IN AUTOCAD 2010
"Interesting.  I'm not sure what I can do about it-- the oldest AutoCAD I have available for testing is 2013.  AutoCAD 2010 is actually 12 years old which is an eternity in software.  You can try sending me a simple converted…"
Aug 1
norton torres replied to norton torres's discussion I GOT AN ERROR WHILE RENDERING IN AUTOCAD 2010
"yes... is every 3d model that I I import from autocad 2018 to autocad 2010 and  it dosent matter that I convert the drawing  in trueview to dwg 2010 it continues the error, it happens this way, I open the drawing in autocad 2010 then I…"
Jul 31
Roy Hirshkowitz replied to norton torres's discussion I GOT AN ERROR WHILE RENDERING IN AUTOCAD 2010
"If it's crashing consistently with a particular drawing, let me know, there may be a problem.  Please don't use all caps when composing forum messages."
Jul 30
norton torres posted a discussion

I GOT AN ERROR WHILE RENDERING IN AUTOCAD 2010

 I OPEN A 3D DRAWING IN AUTOCAD 2010 IT CRASH WHILE RENDERING WITH ACCURENDER.See More
Jul 28
Rich Hart posted a discussion

Grass Options for nXtRender

A user asked about the different ways to add grass to a model. Below are sample renderings showing 3 different approaches, along with links to download the groundcover and material files used.1. Textured Material - Use a material with a grass texture image.This model was rendered by simply using the textured nXt material call Grass-Rye_Dark.ArMaterial.This material is included with the standard nXt Material Libraries that can be downloaded here:…See More
Jun 22

© 2021   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service