AccuRender nXt

advanced rendering for AutoCAD

Hello All,

Installed newest NXTrender 64-bit on two new identical windows 7 64-bit machines with Autocad Architecture 2011 64-bit.

The armaterial thumbnails show up on one machine but not the other. I've tried registering the .dll as discussed in previous forum topics, but that does not work. Have also uninstalled and re-installed on the machine to no avail. Any other ideas?

Thanks

James

Views: 357

Reply to This

Replies to This Discussion

Which .dll did you try registering and what was the result?  You can run regsvr32 as many times as you want without hurting anything.  Make sure you logoff/on after you resgister it.

I tried to register the ArMatThumb.dll first, also tried ArMatThumb64.dll.

I had at first tried running the reg.thumb.bat which came up with the error "The module "ArMatThumb64.dll" was loaded but the call to DllRegisterServer failed with error code 0x80070005".

After that was when I ran the regsvr32 command in administrator mode. again using both .dll's mentioned above. Message that came up was "The module armatthumb.dll failed to load. Make sure the binary is stored at the specified path or debug it to check for problems with the binary or dependent .DLL files. The specified module could not be found"

Have also logged off/on since.

Try one more time just to make sure-- I think you're on the right track. The file you need to register is armatthumb64.dll-- don't bother with the other one.  It must be run from an elevated command prompt.

Try the following:

  1. Make sure you're logged in as an Administrator.
  2. In the start menu All Programs->Accessories right click in the command prompt and select Properties.
  3. Select Advanced and check the box marked Run as Administrator.
  4. Run the program-- you should get an Admin Command Prompt window.
  5. Navigate to the accurender folder-- usually cd "c:\program files\accurender nxt"
  6. Run regsvr32 on armatthumb64.dll.

Let me know if you get any error messages.

I seems to have the same issues for AutoCad 2007 on a Win 8.1 64bits machine. Which way to go.

got this error thumbnails show in AutoCad 2016 64 bit but not on AutoCad 2007 on the same machine.

Great that worked! Thank you very much.

I got the same problem -> now (with this) it works again - thank you very much !!! :-)

RSS

Search

Translate

Latest Activity

Rich Hart replied to Paul Jackson's discussion Bricscad
"Unfortunately, we don't have a version that works with BricsCAD now, and that older trial version cannot be reinstated."
Jun 19
Alfons Akamp replied to Paul Jackson's discussion Bricscad
"Ich habe hier auch eine nxtrender Version für Bricscad 15. Die sieht anders aus, als die von Acad. Leider ist auch bei mir der Testzeitraum schon lange abgelaufen. Gibt es die Möglichkeit mir eine Testlizenz dafür zuzuschicken??…"
Jun 19
George Ioannidis commented on Chris Fox's photo
Thumbnail

Bedroom

"Another good rendering. Those two photoshopped reading lights are not looking good though. They don't follow the perspective, the left one is higher than the right one. Also, they are supposed to be turned on (judging from the light on wall…"
Jun 15
George Ioannidis commented on Chris Fox's photo
Thumbnail

Single Family Home

"Great image as always. I would just blur the tree shadow on the lawn to match soft shadows on the building. Nice blending of cut-out greenery. Excellent job."
Jun 15
George Ioannidis commented on Chris Fox's photo
Thumbnail

Railroad kitchen

"Very nice rendering Chris! The only thing that distracts me is the fruit bowl. It's too evidently pasted in PS.  Another thing (nothing to do with rendering) is the microwave above the stove. I would rather expect a cooker hood there."
Jun 15
akinlolu olugboji posted a discussion

trim and extension command

On AutoCad 2021.The trim and extension command works funny. I initiate the command then click the cutting edge (press entre) then click the lines I need to trim or extend.Now I initiate the command and as soon as I click the object selected trims or extend.  How can I correct this, it is really affecting my work?See More
Jun 14
Chris Fox posted photos
Jun 12
ebenezer attah koomson posted photos
Jun 3

© 2020   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service