AccuRender nXt

advanced rendering for AutoCAD

Materialien

Hallo zusammen

Wie kommt es, das ich bei einigen Volumenkörper die Materialien sehe und bei anderen Volumenkörpern die auf dem gleichen Layer liegen, die Materialien nicht sehe??
Was ist aus dem Speicherleck geworden??
Wann kommt Comotion 012??

Grüsse

Akamp

Views: 79

▶ Reply to This

Replies to This Discussion

Permalink Reply by Roy Hirshkowitz on October 5, 2010 at 9:09am
Use the Remove Material from Object button on the objects whose materials do not display correctly. This should fix the problem. Let me know.
Permalink Reply by Marc Chaumier on October 5, 2010 at 10:15am
It works, but not on the blocks... I have to explode, unfortunately :o(
Permalink Reply by Marc Chaumier on October 5, 2010 at 9:57am
I have the same problem (till the begining of nXt I believe), I use the "match properties" tool, with one object that is correct. But if I make a "WBlock" with some objects, I can be sure that any material will be visible in the new dwg, and I must draw an object (cube, sphere...) on the layer (this new object has always the material visible), and with "match properties", attribute the material for all the objects of each layer... Take lot of time...
But if "remove material" fix the problem, that could save lot of time, to use it, in one time, on all the objects of the drawing... I'll try!
Permalink Reply by Roy Hirshkowitz on October 5, 2010 at 10:02am
Check the _CMATERIAL system variable as well. It should be set to BYLAYER
Permalink Reply by Marc Chaumier on October 6, 2010 at 12:57am
Thx Roy, but it is set to BYLAYER, I don't know why that issue on ALL the drawings. Does it come from acad or nXt. I believe acad... but...
Permalink Reply by akinlolu olugboji on October 5, 2010 at 10:18am
@ Marc Chaumier.-Right click on the block and choose edit block. This allows you access to the block components. Then use the remove material button and save the changes to the block. This should automatically update all other similar blocks and correct material assignment and display.

@ Roy.-At times this does not work if the block is inside an X-Ref file, yet renders well using autocads' naive render command.
Permalink Reply by Marc Chaumier on October 6, 2010 at 1:01am
Thx Akin, I forget always that tool... I came to acad with the release 13, and my mind is a little bit stiff...
Permalink Reply by akinlolu olugboji on October 6, 2010 at 4:59am
Came in with 14, but always checking the what new section to keep me updated.

RSS

Search

Translate

Latest Activity

John Ferris posted a discussion

AutoCad 2026

Roy/ All,Currently use AR5 with AutoCad Architecture 2017. Have, and typically use ACAD 2022, but AR5 doesn't load, so I revert back to 2017 when it's time to use AR5).Long time user...had to create new profile due to Architecture firm closing (boss retired). Am now with GC firm and have been using old computer from Arch firm (Boxx Apexx 2) with above mentioned software. Been working fine. Just got new new computer, and am updating software.Downloaded AutoCad Architecture 2026. Where can I get…See More
Apr 23
0 Comments
Orbe3D commented on OYEBANJI EMMANUEL's photo
Thumbnail

interior 1x1_2015-2024-08-26-16-55-09x

"Beautiful. You can also check our 3d modeling"
Apr 9
Orbe3D commented on OYEBANJI EMMANUEL's photo
Thumbnail

V6x copy

"Beautiful"
Apr 9
Roy Hirshkowitz replied to Maciej's discussion nXt + AutoCAD 2025
"Resolved via email (support@renderplus.com)"
Feb 20
Maciej posted a discussion

nXt + AutoCAD 2025

Gentlemen,The last file I used to load, was ArAcad_24_64.arx, and, unfortunately, it doesn't work with Acad 2025.Any idea how to get the proper nXt-App which suits Acad 2025?Any help appreciated...Regards, Maciej MarkowskiSee More
Feb 17
1 Comment
OYEBANJI EMMANUEL replied to OYEBANJI EMMANUEL's discussion CAN WE GET PETER MILNER TO TRAIN SOME OF US FOR A TOKEN ?
"I meant Chris Fox, not David."
Feb 13
OYEBANJI EMMANUEL posted a discussion

CAN WE GET PETER MILNER TO TRAIN SOME OF US FOR A TOKEN ?

Good day, forum members,I was thinking that we could each, if interested, contribute a significant token to give Peter Milner and David to train us virtually in nxt render for Autocad. Am not sure he still uses it but the experience he has spanning over 20 years cannot be underestimated. I wish the forum co-ordinators could look into this. So that more of us will produce realistic renders with the paid version of nxt render and we will be able to encourage other users of other more advanced…See More
Feb 12
1 Comment
OYEBANJI EMMANUEL commented on OYEBANJI EMMANUEL's photo
Thumbnail

V3x copy

"Thanks"
Feb 11

© 2025   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service